Basic Parameters

Model: PCI-6024E

Brand: NI

Bus: PCI bus

Product Type: E Series Multi-functional Data Acquisition Card

Analog Input: 16 single-ended / 8 differential

Resolution: 12 bits

Maximum Total Sampling Rate: 200KS/s

Analog Output: 2 channels

Digital IO: 8 bidirectional channels

Counter: 2 24-bit channels

External Interface: 68-pin SCSI interface

Simulation Input

Programmable range: ±0.05V, ±0.5V, ±5V, ±10V

High input impedance: greater than 10G ohms

Channel overvoltage protection

Default DC coupling

Built-in 512 sample FIFO buffer

Support for continuous scanning acquisition

Analog Output

Output resolution: 12 bits

Maximum update rate: 100KS/s

Standard output range: ±10V

Stable load driving capability

Suitable for analog signal output and closed-loop control

Digital Ports

Standard 5V TTL level

Free configuration of input and output modes

Satisfy the requirements of switch quantity acquisition and control

Timer Counter

Built-in 2 channels of 24-bit counter

Built-in 20MHz high-frequency clock

Support for pulse counting, frequency measurement, phase acquisition, pulse output

Synchronous triggering

Support for software triggering and external hardware triggering

Equipped with RTSI synchronous bus

Support for synchronous operation of multiple boards

Support for high-speed data transmission via DMA

Environment and Electrical

Standard PCI half-length card

Operating temperature: 0℃ to 55℃

Operating humidity: 10%-90% (no condensation)

Powered directly by the motherboard PCI slot

Software Compatibility

Compatible with official NI-DAQmx drivers

Compatible with LabVIEW C++, C#, VB, etc. development software

Fully supported by Windows mainstream systems Applicable scenarios

Multi-channel data acquisition in industrial sites

Signal measurement and control of automated equipment

Laboratory data testing and acquisition

Measurement of pressure, temperature and voltage sensors

Construction of small closed-loop control systems