I. Basic Information

Model: PCI-6010E

Brand: National Instruments NI

Product Type: E Series Multi-Channel DAQ Dynamic Signal Acquisition Card

Bus: PCI

Analog Input: 8 channels synchronized, differential IEPE

Resolution: 16 bits

Sampling Rate: Up to 200 kS/s per channel

Analog Output: None

Digital I/O: None

Connector: 68-pin VHDCI

Product Status: Out of Production

Features: 8-channel synchronized IEPE conditioning, anti-aliasing filtering, high-precision frequency domain measurement, suitable for microphones/accelerometers

II. Application Scenarios

Vibration / Noise Testing, Microphone Array

Accelerometer Signal Acquisition, IEPE Sensor

Frequency Domain Analysis, FFT Spectrum Measurement

Modal Analysis, Structural Dynamics Testing

Acoustic Testing, Audio Equipment Calibration

Industrial Equipment Condition Monitoring, Bearing Vibration

Research Laboratory, High-Precision Dynamic Measurement

III. Analog Input Specifications

Channel Configuration: 8 Differential Channels, Synchronous Sampling

Resolution: 16 Bits

Maximum Sampling Rate: 200 kS/s per channel

Input Range: ±10 V

Coupling Mode: AC/DC (Software Selectable)

IEPE Conditioning: Built-in 4 mA Constant Current Source

Anti-aliasing Filter: 8th Order Elliptic, Automatically Match Sampling Rate

Input Impedance: 1 MΩ

Overvoltage Protection: ±30 V

Synchronization: Channel Skew < 1 µs

IV. Signal Conditioning

IEPE Supports ICP/IEPE Sensors: 4 mA/24 V

Coupling: AC (3.4 Hz High Pass) / DC, Software Switching

Gain: Software Programmable: 1/10/100

Filtering: Automatic Anti-Aliasing, Low Pass

V. Trigger and Synchronization

Trigger Source: Software / External

Trigger Mode: Edge / Gate Control

Synchronization Interface: RTSI, Multi-Card Synchronization

External Clock: 10 MHz Reference Input

VI. Physical and Electrical Specifications

Card Size: Standard PCI Half-Length Card

Interface Panel: 68-pin VHDCI

Power Supply: +5 V 0.5 A

Operating Temperature: 0–55 °C

Operating Humidity: 10%–90% No Condensation

Weight: Approximately 250 g

VII. Software Compatibility

Driver: NI-DAQmx

Development Environment: LabVIEW, LabWindows/CVI, C#, C++

Operating Systems: Windows XP/7/10/11 32/64 Bit

VIII. Core Features

8 Channels Synchronous, 16 Bits, 200 kS/s

Built-in IEPE Conditioning, Directly Compatible with Accelerometers / Microphones

Automatic Anti-Aliasing Filtering, Simplifies Signal Conditioning

AC/DC Coupling: 3.4 Hz High Pass

±10 V Range, ±30 V Overvoltage Protection

RTSI Multi-Card Synchronization, Expanded Channel Count

68-pin VHDCI High-Reliability Connection

E Series High-Precision Frequency Domain Measurement Preferred