I. Basic Information

Model: cRIO‑9014 (Part Number: 779564‑01)

Manufacturer: National Instruments (NI)

Series: CompactRIO (cRIO)

Status: Obsolete, released in 2007, has been replaced by the cRIO‑903x/904x series

Position: Embedded high-speed control / monitoring / data recording, rugged without fan, industrial-grade wide temperature range

II. Core Hardware Specifications

Processor: Freescale MPC5200 (PowerPC architecture), 400 MHz, with hardware floating-point and MMU

Real-time System: Wind River VxWorks RTOS (highly reliable, low jitter)

Memory: 128 MB DRAM

Storage: 2 GB non-volatile flash memory (fault-tolerant file system, suitable for data recording)

I/O Expansion: No built-in C-series slots, must be used with C-series modules in cRIO chassis (such as cRIO‑910x/911x)

III. Interfaces (Front Panel)

1 × 10/100 Mbps Ethernet (programming, real-time communication)

1 × USB 2.0 (for USB drives, peripherals)

1 × RS‑232 Serial Port (DB9, serial device)

Power Supply: 9–35 VDC wide voltage supply

Status Indicators: PWR, RUN, ERR, LINK/ACT

IV. Mechanical and Environmental

Size (excluding chassis): Approximately 190 × 110 × 45 mm

Installation: Standard DIN rail

Operating Temperature: -40 °C ~ +70 °C (extended temperature, industrial rugged)

Storage Temperature: -55 °C ~ +85 °C

Humidity: 10%–90% RH, no condensation

Shock Resistance: 5 g (5–500 Hz), no fan design

V. Software and Compatibility

Programming: LabVIEW Real-Time, LabWindows/CVI

Supported Protocols: TCP/IP, UDP, Modbus TCP/RTU, EtherCAT (requires chassis support)

Compatible Chassis: cRIO‑9101, cRIO‑9102, cRIO‑9111, cRIO‑9112, etc.

Compatible I/O: Full series of NI C-series modules (as you previously checked, cFP corresponds to C-series: NI‑9213, NI‑9237, etc.)

VI.停产 Replacement (Direct Upgrade)

Recommended Replacement： cRIO‑9030 / 9031 (Dual-core Intel Atom， NI Linux RT， 1 GB RAM， 4 GB storage， faster， lower power consumption)

Features： Directly compatible with old chassis and C-series I/O， simple software migration

VII. Typical Applications

High-speed machine control (motion control， synchronous control)

Equipment status monitoring and fault diagnosis (vibration， temperature， strain)

Vehicle/In-vehicle data recording (rugged， wide temperature， no fan)

Industrial automation and process control (strong interference， high reliability scenarios)