MVME162PA-344SE
Description
II. Core Processor and Memory
Processor: MC68040RC33A, 33 MHz, 32-bit, with built-in hardware FPU, 8KB L1 cache, MMU, and integrated Petra II ASIC.
DRAM: 16MB 32-bit, with parity check.
SRAM: 512KB with battery backup, data retention during power loss.
Flash: 1MB, with 162Bug monitoring firmware.
NVRAM/RTC: 8K×8, with battery-backed real-time clock.
III. Board-Specific Interfaces (Critical S-Type: with SCSI)
Ethernet: Dual 10Mbps, DMA, 10BASE-T/AUI, standard isolation.
Serial Port: 2×EIA-232-D, 1×Console (DTE), 1×User (DCE), up to 115200bps.
SCSI-2 Single-ended: Dedicated DMA, up to 20MB/s, can connect hard drives / optical drives / tape drives, up to 7 devices (ID0-6).
IP Expansion: 4 paths of IndustryPack (IP), each path independent DMA, supports analog / digital / serial IP modules.
VME Bus: A32/D64, master / slave / system controller, standard anti-interference.
Timer / Watchdog: 6×32-bit programmable timers, hardware WDT.
IV. Electrical and Environmental (Same as Standard Version - 344)
Power Supply: +5V DC, typical 3.5A.
Operating Temperature: 0℃~+70℃ (non-wide temperature).
Storage Temperature: -55℃~+125℃.
Isolation Immunity: Standard level, channel-to-channel 250Vrms, module-to-bus 500Vrms.
V. Structure and Compatibility
Size: 6U VME (233.4×160mm), dual-height.
Weight: Approximately 0.9kg.
Compatibility: Compatible with -344/-344L/-344SE pins; -344S has SCSI, -344E does not have SCSI.
VI. Firmware and Applications
Firmware: 162Bug, serial port configuration, memory read/write, reset, boot.
I. Core Positioning
MVME162PA-344SE is a 6U VME dual-high industrial single-board computer (SBC) from Motorola/Emerson, combining the features of -344S (with SCSI) and -344E (wide-temperature ruggedized) into one model. The core is the same as the standard version, while it also has SCSI-2 interface and wide-temperature ruggedization capabilities, suitable for industrial sites with large-capacity storage and harsh environments. Applicable fields: Industrial automation, data acquisition, motion control. Primarily used in systems that require onboard SCSI storage.
II. Core Processor and Memory
Processor: MC68040RC33A, 33 MHz, 32-bit, with built-in hardware FPU, 8KB L1 cache, MMU, and integrated Petra II ASIC.
DRAM: 16MB 32-bit, with parity check.
SRAM: 512KB with battery backup, data retention during power loss.
Flash: 1MB, with 162Bug monitoring firmware.
NVRAM/RTC: 8K×8, with battery-backed real-time clock.
III. Board-Specific Interfaces (SE Type: SCSI + rugged dual pair)
Ethernet: Dual 10Mbps, DMA, 10BASE-T/AUI, E-type enhanced isolation and anti-static.
Serial Port: 2×EIA-232-D, 1 control console (DTE), 1 user (DCE), up to 115200bps.
SCSI-2 Single-ended: Dedicated DMA, up to 20MB/s, can connect hard drives / optical drives / tape drives, up to 7 devices (ID0-6), same as 344S.
IP Expansion: 4 paths of IndustryPack (IP), each path independent DMA, supports analog / digital / serial IP modules.
VME Bus: A32/D64, master / slave / system controller, E-type enhanced bus anti-interference and ESD protection.
Timer / Watchdog: 6×32-bit programmable timers, hardware WDT.
IV. Electrical and Environmental (SE Type Critical: wide temperature + high isolation)
Power Supply: +5V DC, typical 3.5A.
Operating Temperature: -40°C to +85°C (same as 344E, wide temperature).
Storage Temperature: -55°C to +125°C.
Isolation Immunity: Channel-to-channel 500Vrms, module-to-bus 1000Vrms isolation (same as 344E, 2 times standard version).
Vibration / Shock: 0.5mm peak-to-peak (10–500Hz); 10G, 50ms half-sine wave.
V. Structure and Compatibility
Size: 6U VME (233.4×160mm), double height.
Weight: Approximately 0.9kg.
Compatibility: Compatible with -344/-344L/-344S/-344E pins, can be directly replaced; SE = SCSI + wide temperature rugged.
VI. Firmware and Applications
Firmware: 162Bug, serial port configuration, memory read/write, reset, boot.
Applicable: Industrial automation, data acquisition, motion control, mainly used for harsh environments that require both onboard SCSI storage and wide temperature/high immunity.










Get a Quote