XINJE XC3-60R-E 0W403349812411B3 Product Description

Overview

XINJE XC3-60R-E 0W403349812411B3 is a Xinje XC3 series standard PLC main unit with relay outputs. The official Xinje store record identifies XC3-60R-E as a 60-point CPU with 36 digital inputs and 24 relay outputs, powered by AC 100 to 240 V, with two AB-phase counting channels. The appended code 0W403349812411B3 appears to be a serial, production or asset reference; public search did not locate a separate datasheet for that exact code, so it should be verified against the PLC label, purchase record or original machine spare list.

Features

The XC3-60R-E main unit provides 36 DC 24 V NPN inputs, addressed X0 to X43, and 24 relay outputs, addressed Y0 to Y27. Input type is NPN; output type is relay, identified by the R in the model. The supply specification listed by Xinje is AC 220 V nominal within the AC 100 to 240 V range.

Programming uses instructions and ladder diagram. Processing speed is listed as 0.5 µs. User program capacity is 128 KB. Internal coils include 544 X coils, 544 Y coils and 8768 M internal relays, with 1024 S step relays and 640 T timers per the XC3 performance table. FlashROM register area listed as 4080 words, FD0 to FD3055.

The XC3-60 supports real-time clock, communication, expansion module and BD board. Communication port 1 is RS-232 for upper computer, HMI programming or debugging. Communication port 2 is RS-232 or RS-485 for networking or connection to smart instruments and drives. Port 3 is an optional BD-board expansion communication port for RS-232C or RS-485. The PLC supports high-speed counting, high-speed pulse output, external interruption, expansion modules and BD boards.

Specs

Brand: XINJESeries: XC3Model: XC3-60R-EAppended reference: 0W403349812411B3Product type: PLC main CPU unit Total I/O: 60 pointsDigital inputs: 36Input range: X0 to X43 Input type: NPN, DC 24 V Relay outputs: 24Output range: Y0 to Y27 Output type: Relay, R Power supply: AC 100 to 240 V; nominal listed AC 220 VProgramming: Instruction and ladder diagram Processing speed: 0.5 µsUser program capacity: 128 KBInternal X coils: 544Internal Y coils: 544Internal M relays: 8768Step relays S: 1024Timers T: 640FlashROM registers FD: 4080 wordsCommunication: RS-232 port 1; RS-232 or RS-485 port 2; BD-board RS-232C or RS-485 port 3 Special functions: High-speed counting, pulse output, external interruption, RTC, power-off retentive, expansion module, BD board High-speed counting: XC3-60 record shows 4 counting channels, 2 AB-phase and 2 single-phase in the feature table Pulse output: 2 channels External interruption: 3Insulation voltage: DC 500 V, 2 MΩ or above Noise immunity: 1000 V p-p, 1 µs pulse, 1 minuteAmbient temperature: 0 to 60 °CAmbient humidity: 5 to 95 percent, non-condensing Installation: M3 screws or 35 mm DIN 46277 rail Grounding: Third-class grounding; not shared with strong-current system ground Dimensions: 207.4 × 102 × 73.3 mmPackage dimensions: 247 × 136 × 91 mmWeight: 0.9 kg including packaging Product status: Legacy Xinje XC3 PLC spare; compatibility must be verified against program, I/O map and expansion configuration

Principle

The PLC CPU reads field input signals through the 36 NPN digital inputs, executes the ladder or instruction program, and updates the 24 relay outputs according to the control logic. Relay outputs switch external load circuits such as contactor coils, solenoid valves, indicator lamps, motors, alarms or small control relays. Communication ports connect to an HMI, programming computer, inverter, instrument, Modbus network or other automation device.

Replacement should verify the XC3 model, AC supply voltage, NPN input wiring, relay output voltage and load current, I/O address map, expansion modules, BD board, communication protocol, port assignment, program backup, RTC battery or retentive setting, pulse or high-speed counter wiring, mounting rail, terminals and grounding. The appended code 0W403349812411B3 should be matched to the PLC serial label or asset record; do not assume it is a separate communication or option code.

Applications

XINJE XC3-60R-E 0W403349812411B3 is used in existing Xinje-controlled industrial machines, conveyor panels, packaging machines, assembly equipment, material handling, injection molding auxiliary equipment, textile machinery, food or beverage machinery, small process skids, hydraulic or pneumatic control panels and factory automation systems. In legacy installations, it serves as a direct replacement PLC main unit spare when the supply, I/O configuration, relay outputs, communication, expansion and program match the original XC3-60R-E unit.