ABB FENA-01 Ethernet Adapter Module

Overview

ABB FENA-01 is a single-port Ethernet fieldbus adapter, designed as an optional communication card for ABB ACS355 frequency converters. FENA-01 supports three switchable industrial Ethernet protocols: PROFINET IO, EtherNet/IP and Modbus TCP, selected via drive parameter setting. It enables the inverter to exchange real-time control, setpoint, status and diagnostic data with PLC, HMI and host control systems. This ABB FENA-01 is widely stocked as spare communication adapter for ABB ACS355 drive automation assemblies.

Features

ABB FENA-01 Ethernet Adapter uses one RJ45 Ethernet port, auto-negotiating 10/100 Mbps speed. It works as a server/slave device on the Ethernet network.FENA-01 supports standard drive profiles: PROFIdrive, ABB Drives profile and transparent data mode for custom 16-bit or 32-bit word mapping. It supports explicit and implicit messaging for EtherNet/IP, standard Modbus TCP function codes, and PROFINET IO DP-V1.FENA-01 provides front panel LEDs for network status, module health and link activity. It allows remote start/stop, speed/torque reference, parameter modification, fault reading and fault reset over Ethernet. It is installed directly into the option slot of ACS355 control board. This adapter is EMC compliant, CE certified, designed for 24/7 continuous cabinet operation. It is a legacy communication option, replaced by newer FENA-11 / FENA-21 adapters for wider drive compatibility.

Specifications

ABB FENA-01 Ethernet Adapter ModuleBrand: ABB Model: FENA-01 Type: single-port Ethernet fieldbus adapter Compatible drive: ACS355 Ethernet connector: 1 × RJ45 Speed: 10 / 100 Mbps auto detect Supported protocols: PROFINET IO, EtherNet/IP, Modbus TCP Profile: PROFIdrive, ABB Drives, transparent mode Mounting: internal option slot on ACS355 control board Indicators: link, network, module status LED Protection class: IP20 Ambient temperature: 0℃ ~ +55℃ Status: legacy spare for ACS355

Principle

ABB FENA-01 communicates with the ACS355 drive internal bus. This Ethernet Adapter Module receives control commands and setpoints from the Ethernet master, forwards them to the inverter, and collects actual speed, current, fault codes and status from the drive. It packages data into selected Ethernet protocol frames and transmits to the PLC or host system. It also monitors network link and module internal health, and reports communication faults.

Applications

ABB FENA-01 is deployed in conveyor systems, packaging machinery, pumps, fans and small production lines with ACS355 drives. It connects ABB ACS355 inverters to Rockwell, Siemens and other mainstream PLC Ethernet networks. ABB FENA-01 is stocked as spare Ethernet communication adapter for ACS355 drive automation assemblies.