KOLLMORGEN PRD-B040ASIB-62 PRD Series Servo Drive Amplifier

Overview

The KOLLMORGEN PRD-B040ASIB-62 is a PRD series analog servo drive amplifier designed for Kollmorgen AKM permanent magnet synchronous servo motors. The KOLLMORGEN PRD-B040ASIB-62 accepts ±10V analog command signals for torque, speed or position control, and reads encoder feedback signals to achieve closed-loop motion regulation. It is widely used on legacy machine tools, packaging equipment and automated assembly lines, and is a commonly stocked obsolete spare for motion control cabinet maintenance.

Features

The KOLLMORGEN PRD-B040ASIB-62 supports incremental encoder and resolver feedback interfaces for flexible motor pairing. It integrates complete protection functions including overcurrent, overvoltage, undervoltage, over-temperature, short circuit and motor overload detection. The KOLLMORGEN PRD-B040ASIB-62 is equipped with analog command terminals, servo enable input and fault relay output for simple interlock connection with PLC and CNC systems. LED indicators on the front panel display power status, drive enable and fault codes for quick on-site diagnosis. The KOLLMORGEN PRD-B040ASIB-62 adopts 35mm DIN rail mounting and consistent pin definition, supporting direct replacement for the same PRD series drives.

Specs

Device Type: PRD series analog servo drive amplifier Model: KOLLMORGEN PRD-B040ASIB-62 Applicable Motor: Kollmorgen AKM series servo motor Control Mode: Torque control, velocity control, position control Command Input: ±10V analog signal Feedback: Incremental encoder / resolver Power Supply: 230V AC single phase Diagnosis: Front LED status indicators Mounting: 35 mm DIN rail inside control cabinet Protection Grade: IP20 Application: CNC machine tool, packaging machine, material handling equipment, special automation axis

Principle

The KOLLMORGEN PRD-B040ASIB-62 receives analog command signals from the upper controller. The internal control board compares the setpoint value with rotor position and speed feedback from the encoder, then adjusts the PWM output of the power module to drive the servo motor rotation. The drive continuously monitors bus voltage, output current and internal temperature. When abnormal conditions are detected, the KOLLMORGEN PRD-B040ASIB-62 disables power output, triggers the fault relay and stores fault information for troubleshooting.

Applications

The KOLLMORGEN PRD-B040ASIB-62 is used for single-axis dynamic positioning and speed regulation on CNC equipment, packaging machines and sorting automation lines. It serves stable motion control for low and medium dynamic material handling axes. The KOLLMORGEN PRD-B040ASIB-62 applies to spare stock and emergency repair of legacy Kollmorgen PRD motion control racks. It also supports renovation projects for old servo drive replacement.