Model Definition

DKC: Drive Controller (ECODRIVE series)

01.1: Hardware platform version (DKC1.1 family)

030: Rated continuous output current (30 A RMS)

3: Voltage class (300 V DC nominal bus, low-voltage)

FW: Firmware sold separately (user-selected, not preloaded)

Technical Specifications

Electrical Parameters

Input voltage: 3-phase 200–240 V AC, 50/60 Hz

Continuous output current: 30 A

Peak output current: 60 A (2× overload)

DC bus nominal voltage: 300 V DC

Control supply: 24 V DC ±20%

Compatible motors: MKD, MKE series synchronous servo motors

Mechanical & Environmental Parameters

Dimensions (W×H×D): 55 mm × 350 mm × 250 mm

Weight: Approx. 4.8 kg

Operating temperature: 0 °C to +40 °C

Storage temperature: -25 °C to +85 °C

Protection class: IP20

Cooling: Internal forced-air cooling (vertical mounting required)

Interface and Communication Configuration

Motor feedback: Incremental encoder (standard); absolute encoder (optional)

Digital I/O: 24 V DC inputs/outputs (enable, fault, limit, reference)

Communication: Analog/pulse command (standard); PROFIBUS DP, CANopen (optional cards)

Diagnostics: 7-segment display + LED status indicators (power, run, fault)

Expansion: Supports up to 32 position blocks via I/O; 64 blocks via RS232/RS485

Core Functions

Torque, speed, and position control modes

2× overload capacity for dynamic acceleration/deceleration

Built-in homing, jog, and point-to-point positioning

Comprehensive protection: overvoltage, undervoltage, overcurrent, overtemperature, short circuit

Regenerative power capability

Parameterizable gear ratios and feed constants

Application Scenarios

CNC machine tools (milling, turning, grinding auxiliary axes)

Packaging, printing, and textile machinery

Automated assembly lines and material handling

Small-scale multi-axis motion systems

Retrofit of older Indramat DKC01.1 systems

Usage and Maintenance

Mount vertically with ≥80 mm bottom clearance and ≥150 mm top clearance for airflow

Verify input voltage matches drive rating before power-on

Use shielded cables for motor/encoder wiring; separate from power cables

Clean cooling fans/filters every 3–6 months (dusty environments)

Check terminal connections quarterly for tightness

Commission via IndraWorks/DriveTop software with user-selected FW firmware