DDS02.1: Servo drive series 02.1 for DIAX02 systemW: Cabinet internal air cooling150: 150 A continuous rated currentDS50: Premium SERCOS real-time digital bus interface00: Base hardware version, firmware module is ordered separately

DC bus voltage: 300 V DC ±15%, supplied by TVD / TVM power supply unitsControl power supply: 24 V DC (20 V DC to 28 V DC)Continuous output current: 150 APeak output current: 300 A for short-term operationCurrent loop cycle: 62.5 μsSpeed loop cycle: 250 μsPosition loop cycle: 1 msPower dissipation: Approx. 480 WCompatible motors: MDD, MKD, LAR, LAF series high-power servo and linear motors

Cooling method: Cabinet internal air cooling, vertical installation requiredProtection class: IP20 on front panel, IP10 overallOperating temperature: 0 °C to +45 °C, performance derating available up to 55 °CStorage temperature: -30 °C to +85 °CMaximum installation altitude: 1000 m, performance derating required above this heightDimensions (W×H×D): 110 mm × 390 mm × 310 mmWeight: Approx. 8.0 kg

Control interface: DS50 premium SERCOS real-time digital busMotor feedback interface: Standard digital servo feedbackSystem bus: Shared 300 V DC bus for multi-axis connectionDigital I/O: 8 digital inputs and 4 digital outputs for enable, fault alarm, limit switch and brake controlExpansion slots: Multiple slots for optional communication and functional modulesService port: RS232 port for parameter setting via IndraWorks software

Three-loop control of current, speed and position ensures steady dynamic performance under heavy loads.DS50 SERCOS bus provides ultra-high transmission speed and outstanding anti-interference performance for complex multi-axis linkage.Optimized cooling system ensures continuous stable operation under high current output.Modular design supports flexible function expansion and convenient on-site maintenance.Comprehensive protection against overvoltage, undervoltage, overcurrent, short circuit, overheating and feedback signal loss.Supports torque, speed and position control modes for diverse high-power motion control scenarios.

High-precision heavy-duty CNC machine tools and large machining centersLarge multi-axis automated production lines and heavy-load handling robotsMetallurgical, forging and stamping machineryHigh-end automation systems adopting SERCOS bus communicationHigh-power servo system assembly and equipment retrofitting projects

Install the drive vertically and ensure adequate ventilation inside the cabinet.Keep ambient temperature below 45 °C during operation.Install the matched firmware module and complete all wiring before commissioning. Configure parameters via IndraWorks software.Clean internal fan and heat sink every 6 months, and inspect terminal connections periodically. Calibrate control loops every 2 years to maintain stable operation.