1. General Description

2. Technical Specifications

• Model Number: 0100-20155

• Material: High strength industrial raw material

• Working Environment Temperature: -10°C to +55°C

• Storage Temperature: -25°C to +65°C

• Relative Humidity: 15% – 90% RH, non-condensing

• Installation Type: Fixed mounting / assembly type

• Applicable Scene: Industrial equipment, mechanical parts matching, general assembly use

• Characteristic: Wear resistance, corrosion resistance, low failure rate

3. Main Features

1. Adopts premium raw material and precision manufacturing process for long service life.

2. Standard dimensional tolerance, good interchangeability with same specification parts.

3. Integrated structural design, high stability and strong shock resistance.

4. Easy to install and replace, no complex adjustment required.

5. Adaptable to conventional complex working environments, dustproof and anti-oxidation.

6. Low daily maintenance cost, convenient for later inspection and replacement.

4. Installation Instructions

1. Before installation, inspect the product surface for damage, deformation or defect.

2. Confirm the matching installation position and size, keep the assembly area clean and tidy.

3. Align the product with the reserved mounting position, install and fix it firmly.

4. Check the assembly clearance and fastening degree to ensure no looseness or offset.

5. After installation, conduct a running check to verify normal matching status.

5. Operation Instructions

1. Use the product within the rated temperature, humidity and load range only.

2. Avoid strong impact, extrusion and scratch during operation and daily use.

3. Do not operate beyond specified working limits to prevent performance degradation or damage.

4. Keep the product away from corrosive liquid, high dust and high moisture environment.

5. Stop application timely if abnormal vibration or matching anomaly occurs.

6. Maintenance and Care

1. Perform regular surface cleaning to remove dust and impurities.

2. Periodically check fastening status and assembly position, retighten if loose.

3. Do not use corrosive detergent to clean the product surface.

4. For long-term idle storage, place in dry, cool and ventilated indoor environment.

5. Do not disassemble or modify the product privately; professional maintenance is required.

7. Common Faults and Handling

• Assembly jamming: Check for foreign matter or dimensional misalignment, re-align and reinstall.

• Loose fitting: Re-fasten the mounting position and check matching parts for wear.

• Surface oxidation: Keep environment dry, replace in time if oxidation affects use.

8. Safety Precautions

1. Prohibit use in flammable, explosive and strong corrosive occasions.

2. Non-professional personnel shall not disassemble, cut or modify the product.

3. Avoid improper installation which may cause equipment abnormal operation.

4. Strictly follow industry assembly standards during installation and use.

5. Once abnormal condition appears, stop use immediately and contact supplier for support.

9. Package List

• Main product 0100-20155 × 1

• Installation auxiliary parts

• Official Instruction Manual