5X00270G01 High-Side Digital Output Electronic Module (HSDO EMOD) for Emerson Ovation DCS_Ningde Androld Automation Equipment Co.,Ltd.

June 12, 2026

5X00270G01 High-Side Digital Output Electronic Module (HSDO EMOD) for Emerson Ovation DCS

The 5X00270G01 is an original Emerson (ex-Westinghouse) high-side 24VDC digital output electronic module exclusively designed for the Ovation DCS platform, paired with the dedicated personality module 5X00273G01 to complete hardware configuration. It receives logic commands from the main controller, outputs high-side switching signals to drive field relays, solenoid valves, contactors, indicator lamps and other low-power discrete loads, and executes sequence control, equipment start/stop logic and alarm indication tasks. It supports channel galvanic isolation, full-channel fault diagnosis, hot swapping and simplex/redundant deployment, and is a high-reliability DO execution module for critical industrial control loops.

Description

1. Basic Product Information

Part Number: 5X00270G01
Manufacturer: Emerson Automation Solutions (Former Westinghouse)
Module Type: High-Side Digital Output (HSDO) Electronic Module
Matched Personality Module: 5X00273G01
Compatible System: Ovation Distributed Control System
Installation Mode: Single-slot plug-in mounting on standard Ovation 4/8-slot I/O backplane
Redundancy Support: Supports simplex operation or dual-module redundant hot backup configuration
Hot Swap: Hot-swappable online under standardized operation procedures; no rack power shutdown required
Origin: United States
Net Weight: 0.34 kg
Dimensions: 120 × 50 × 165 mm
Protection Grade: IP20, installed only inside indoor control cabinets
Structure: Standard FRU field replaceable unit

2. Core Technical Specifications & Key Features

2.1 Output Electrical Parameters

Output channels: 8 independent high-side MOSFET output channels
Rated output voltage: 24VDC
Single-channel load capacity: Max 500mA
External power supply options: Ovation auxiliary power (max 2A) or independent external 24VDC field power (max 4A)
Switching mode: High-side sourcing output, directly energizes external load coils
Configurable fail-safe state: Hold last state, fixed ON or fixed OFF upon module communication loss or hardware failure

2.2 Isolation & Protection Design

Each channel features independent optical galvanic isolation; isolation withstand voltage reaches 1500VDC, effectively isolating field-side surge interference from the internal backplane logic bus
Built-in multi-level protection circuits for each channel: overcurrent, short-circuit, reverse polarity and transient surge suppression; single-channel fault isolation will not affect other channels or rack bus operation
Onboard hardware anti-chattering filter eliminates frequent mis-switching caused by external load contact bounce and electromagnetic coupling disturbance

2.3 Communication & Diagnosis Capability

Communicates with the controller CPU via the Ovation dedicated backplane bus, realizes cyclic command reception and status feedback
Front panel independent LED indicators display module power supply, backplane communication running status and each channel output ON/OFF & fault alarm status for rapid on-site inspection
Complete real-time self-diagnosis: detects load open circuit, overload, short-circuit and communication interruption; fault codes and abnormal channel numbers are uploaded to the upper system diagnostic platform remotely

2.4 Environmental & Certification Indicators

Operating temperature range: -10℃ ~ +60℃
Storage temperature range: -40℃ ~ +70℃
Relative humidity: 5%–95% RH, non-condensing
Fully complies with IEC 61000 series industrial EMC electromagnetic compatibility standards, shock and vibration resistant
Certified with CE, UL international industrial safety certifications

3. Operation & Maintenance Advantages

Must be used together with the matching 5X00273G01 personality module; no onboard jumper modification needed for on-site wiring mode configuration
Supports redundant bumpless switchover for critical interlock loops, eliminating single-point failure risk and ensuring uninterrupted execution of safety logic
Standard FRU spare part design, fully interchangeable for same-model modules, convenient unified spare parts inventory management for power plants and petrochemical enterprises
Fully compatible with Ovation 5X00225G01 (4-slot) and 5X00226 series (8-slot) backplanes, applicable to new cabinet assembly, system expansion and legacy DCS renovation projects

4. Application Fields

This high-side digital output module is core discrete execution hardware of the Ovation DCS I/O layer, widely deployed in thermal power units, combined-cycle power plants, oil refineries, natural gas processing stations, metallurgical plants and municipal wastewater treatment facilities. It outputs switching commands to control motor start/stop, solenoid valve switching, local alarm light triggering and auxiliary equipment sequential actions, provides reliable drive signals for equipment sequence control and safety interlock logic, and guarantees long-term stable unattended automatic operation of industrial production lines.

Contact Info