1. Product Overview

2. Technical Parameters

• Product Model: 82402025

• Overall Structure: Integrated integrated design

• Working Mode: Continuous / Intermittent optional

• Operating Temperature: -10℃ ~ +50℃

• Storage Temperature: -20℃ ~ +60℃

• Humidity Requirement: 10%~90% RH, non-condensing

• Installation Method: Fixed mounting / embedded installation

• Service Life: Long-term stable use under rated working conditions

3. Main Features

1. Adopt high-quality raw materials and precision processing technology, wear-resistant and anti-aging.

2. Optimized internal structure design, low failure rate and stable operation.

3. Easy to install and connect, no complicated debugging required.

4. Good universality, compatible with most matching equipment of the same specification.

5. Dust-proof and anti-interference design, adapt to complex working environment.

6. Simple maintenance, low later use cost.

4. Installation Instructions

1. Before installation, check whether the product appearance is intact and whether the accessories are complete.

2. Select a flat, firm and well-ventilated installation position, avoid direct sunlight and humid corrosive environment.

3. Fix the product in the reserved position according to the installation size, ensure firm fixation without looseness.

4. Connect the matching lines and interfaces in accordance with the marking requirements, confirm correct connection and no virtual connection.

5. After installation, check all connecting parts again to ensure no abnormal assembly.

5. Operation Guidelines

1. Before starting up, confirm that the installation and connection are correct and the environment meets the working requirements.

2. Turn on the power or start the supporting equipment, the product enters the normal working state automatically.

3. During operation, do not disassemble or knock the product at will to avoid affecting performance.

4. Follow the rated working conditions for use, do not overload or exceed the temperature and humidity limit.

5. When stopping use, cut off the power supply in sequence and place it in a dry environment.

6. Maintenance & Daily Care

1. Regularly clean the surface dust and sundries, keep the product clean and ventilated.

2. Regularly check the connecting parts and fixing parts, tighten loose parts in time.

3. Avoid contact with corrosive liquid, oil and strong impact.

4. If it is not used for a long time, cut off the power supply and store it in a dry and cool place.

5. Do not disassemble the product privately; any maintenance shall be handled by professional personnel.

7. Troubleshooting

• Unable to start: Check power connection and line connection, confirm whether the installation is in place.

• Unstable operation: Check whether the ambient temperature and humidity exceed the standard, confirm whether the fixing is loose.

• Abnormal noise: Check internal foreign matters or loose structural parts, stop operation and inspect in time.

8. Safety Precautions

1. Do not use in flammable, explosive and strong corrosive environment.

2. Non-professionals are not allowed to disassemble and modify the product by themselves.

3. Keep away from children to avoid accidental collision and damage.

4. Strictly abide by the working parameter range, do not use beyond the limit.

5. In case of abnormal smell, heat or fault, stop using immediately and contact after-sales service.

9. Package Contents

• 82402025 Product Main Unit ×1

• Installation Accessories Set

• Product Instruction Manual