Model Explanation

DDC1.1: DDC series, hardware V1.1, first-generation IP65 air-cooled platform

K200A: K = natural convection cooling; continuous / peak 200A; A = standard noise (compatible with 100–200A motors)

DL02: D = digital encoder feedback; L = single-axis positioning control (built-in DLC module); 02 = enhanced positioning version

00: Function code 00 = basic version; no factory firmware (FW must be purchased separately)

Basic parameters (K200A platform)

Input: Three-phase AC 380–480V ± 10%, 50/60Hz, 30kVA

Continuous output: 200A; peak 200A

Power: continuous 9kW; peak 18kW

PWM carrier: 4kHz

Braking: built-in regenerative braking, peak 40kW, continuous 1kW

Protection: IP65 (dust-proof, oil mist-proof)

Temperature: +5°C to +45°C (rated), maximum + 55°C (derated)

Weight / size: approximately 48kg; 550×360×320mm

Altitude: ≤ 1000m  No reduction factor

Interface and Communication

Motor feedback: Digital encoder (compatible with MDD/MKD200A series)

Control interface: Built-in single-axis positioning (DL02), can be independently programmed and run

Debugging port: RS232 (DDS2PC/Motion Manager software)

I/O: 15DI/16DO (24VDC, limit / reset / trigger)

Expansion slot: U1–U4 (optional fieldbus card, such as Profibus, Interbus)

Core functions (DL02-00 Enhanced Positioning Edition)

Built-in single-axis positioning (DL02): No need for external positioning module, complete point-to-point, reset, soft limit, electronic gear independently

Three closed-loop: Position / Speed / Torque control

Enhanced positioning: Multi-segment programs (up to 3000 blocks), position following, synchronous axis, limit monitoring

Diagnosis: Overcurrent / Overvoltage / Overheat / Short circuit / Phase loss protection

Power-off parameter retention, built-in regenerative braking

No firmware operation possible, additional DIAX02 firmware programming required

Comparison with the same series K200A positioning edition

DL01-00: Standard positioning, digital feedback, no firmware, basic positioning

DL02-00: Enhanced positioning, digital feedback, no firmware, multi-segment programs / electronic gear

DL02-01: Enhanced positioning, digital feedback, with firmware, ready to use upon power-on

DL12-00: Advanced positioning, digital feedback, no firmware, multi-axis synchronization Application scenario

High-power single-axis independent positioning for machine tools (such as large tool towers, heavy feed axes, indexing axes)

High-speed positioning for heavy-duty workstations in packaging, textile, and electronic manufacturing (without the need for a host computer)

Replace the old DDC-K200A positioning driver with MDD200A/MKD200A motors