Model Analysis

DDC01.2: DDC series, hardware version V1.2, IP65 air-cooled platform

N200A: Peak current 200A, natural convection cooling, standard noise

DL11:

D = Digital servo feedback (encoder / resolver)

L = Pure digital command (bus / serial port, no analog input)

11 = Top-level motion control (CNC interpolation, multi-axis linkage, fly-cut / follow-cut)

01: Firmware version 01

FW: Pre-installed DIAX02 firmware, ready to use out of the box, no additional purchase required

Technical Parameters (consistent with N200A platform)

Input: 3×220–230V ±10%, 50/60Hz, 22.5kVA

Continuous output current: 45A

Peak output current: 200A

Continuous mechanical power: 7.5kW

Peak mechanical power: 33kW

PWM frequency: 4kHz

Integrated braking: Peak 40kW, continuous 1.0kW

Protection level: IP65 (can be directly installed without control cabinet)

Environmental temperature: +5°C to + 45°C (rated); maximum + 55°C (derated)

Weight / size: Approximately 22kg; 517×165×298mm

Maximum altitude: 1000m (no reduction)

Interface and communication

Motor feedback: Digital encoder / resolver (compatible with MDD/MKD200A series)

Command interface: Pure digital (PROFIBUS/CANopen/SERCOS, without ±10V analog quantity)

Debugging: RS232 (DDS2PC parameterization)

Digital I/O: 8 inputs / 8 outputs (24VDC)

Expansion slots U1–U5: Optional fieldbus card

Core functions (DL11 top level)

Three closed-loop: Position / Speed / Torque (pure digital instructions)

DL11 top-level motion control:

Up to 3000 program block sequences for programming

Electronic gearing, multi-axis synchronization, master-slave following

CNC-level high-precision interpolation, fly-cut / follow-cut, synchronous cutting

Support for complex contours, multi-axis linkage, synchronous spindle

Most powerful (higher than DL01/DL02/DL05/DL09)

200A peak, suitable for large inertia loads

Regenerative braking + built-in discharge resistor

Self-diagnosis and non-volatile parameter storage Application scenario

Heavy-duty machine tools, gantry, five-axis联动 machining centers

Packaging / Printing / Textile： High-speed shears， synchronous cutting， electronic gears

Robots， automated production lines： Multi-axis synchronization， complex sequences, precise positioning

Matching motors： Rexroth MDD200A， MKD200A series