DDC01.2-N100A-DS68-00_Ningde Androld Automation Equipment Co.,Ltd.

May 26, 2026

DDC01.2-N100A-DS68-00

Full Model Analysis DDC01.2: DDC series, hardware version 1.2 (IP65 protection, air-cooled) N100A: Three-phase 220–230V, 35A continuous / 100A peak, 6kW continuous / 17kW peak DS68: U1–U4 full-slot combination module (DS=SERCOS bus, 68 = fixed configuration) 00: Combined hardware version 00 (basic version, without firmware) (No FW): Factory not burned-in firmware (such as FWC-DSM2.1), must be purchased separately DS68 standard combination (critical, different from DS01) DS68 is a 4-card complete combination, equivalent to "DS01 + PLC + feedback + expansion" in one unit: U1: DSS01.3-FW - SERCOS optical communication (same as DS01 function) U2: CLC-D02.3 - Built-in PLC / motion control card U3: DEA28.1 - Digital encoder feedback interface U4: Cover / expansion -预留 I/O or bus expansion

Description

Core electrical parameters (N100A platform)

Input: 3×220–230V ±10%, 50/60Hz

Output: 35A continuous / 100A peak; 6kW continuous / 17kW peak

Protection: IP65 (dustproof, low-pressure water spray protection)

Cooling: Forced air cooling, with heat dissipation of approximately 500W

Brake: Built-in brake unit, 0.25kW continuous / 20kW peak

PWM frequency: 4kHz

Weight / Dimensions: Approximately 22kg; 517×165×298mm

The essential differences from the DS01 and DL series

DS01 (such as DDC01.2-N100A-DS01-02): Single module (only SERCOS bus), no PLC / local I/O, pure upper-level NC control

DS68 (this model): Fully integrated 4 modules (SERCOS + PLC + feedback + expansion), built-in motion control, can operate independently / in dual-mode with the bus

DLxxx: Local positioning module (pulse / program), single-axis independent control, no SERCOS bus

Application scenarios (exclusive to DS68)

Multi-axis synchronization + local control hybrid production line (electronic cams, linkage + independent workstations)

Small and medium-sized CNC equipment without additional PLC (lathe, grinder, special machines)

High-reliability equipment with SERCOS bus networking + local backup control

Contact Info