Model Analysis

DDC01.2: DDC series, hardware version 1.2

N100A: 3 × 220–230V, air cooling, 100A peak / 35A continuous

DA02: Enhanced analog interface command module (U1 slot)

01: Function code 01, version 01

(No FW): Firmware (e.g. FWC-DSM2.1) needs to be ordered separately

Core Parameters

Input: Three-phase AC220/230V ±10%, 50/60Hz

Output: 35A continuous / 100A peak; 6kW continuous / 17kW peak

Protection: IP65 (dust and water spray protection)

Cooling: Forced air cooling, heat dissipation 500W

Brake resistor: Continuous 0.25kW / Peak 20kW

PWM frequency: 4kHz

Weight: Approximately 22kg

Size: 517 × 165 × 298 mm

DA02 Module Interface (Enhanced Analog Type)

Command: ±10V analog quantity (speed / torque, higher resolution)

Feedback: Digital servo encoder (compatible with MDD motor)

I/O: 8DI/8DO (24VDC); RS232 (X2) debugging port

Enhancements: Compared to DA01, it has additional analog filtering and fault locking functions Main function

Three-loop control: position (analog setpoint), speed, torque

Integrated braking unit; LED status self-diagnosis

Power-off parameter retention; shock-resistant structure can be directly installed Application scenario

High-load single-axis for machines, packaging, printing, etc.

Heavy-duty conveyors, mechanical hands, DDC series renovation and replacement

Maintenance points

Regularly clean the fan / heat dissipation fins; check the IP65 seal

RS232 + DDS2PC debugging; firmware ordered separately