1. Part Number Breakdown

• DDC: Digital Drive Controller

• 01.1: Series 01, hardware revision 1

• K200A: K=air cooling；200=200A；A=standard noise

• DL01-01: D=digital feedback；L=DLC+analog；01=func code；01=updated hardware

• FW: Firmware pre-installed (DLC positioning + standard servo functions)

2. Key Technical Data

Electrical

• Input: 3×AC 380–460 V, 50/60 Hz

• Control Voltage: 24 VDC

• Continuous Output: 200 A

• Peak Output: 400 A (1 s)

• DC Bus: ~700 VDC

• Switching Frequency: 4 kHz

Mechanical & Environmental

• Dimensions (H×W×D): ~360 × 225 × 261 mm

• Weight: ~18 kg

• Protection: IP65

• Operating Temp: 0 °C to +45 °C (full load)

Control & Interfaces

• Modes: Position (DLC) / velocity / torque (DLC + analog)

• Feedback: Digital servo (MDD/MKD, multiturn encoder)

• Command: DLC bus + ±10 V analog (mixed control)

• Comm: RS-232/RS-485 (diagnostics), DLC bus

• Safety: STO, overcurrent, overvoltage, overtemperature

3. “FW” Meaning & Difference

• DDC01.1-K200A-DL01-01: Hardware only (no firmware; must order FW separately)

• DDC01.1-K200A-DL01-01-FW: Hardware + factory-loaded DLC firmware (ready for DLC positioning & analog control)

• FW = preprogrammed, no extra firmware purchase/loading needed.

4. Applications

• High-power single-axis positioning (200A)

• CNC machines with DLC bus + analog ±10 V mixed control

• Heavy-duty gantries, large milling/turning machines

• Transfer systems & material handling

5. Compatible Motors

• MDD series: MDD093A, MDD112A, MDD132A (200A frame)

• MKD series: MKD090B, MKD112B, MKD132B