1. General Description

2. Product Identification

• Model: 171CCS70010

• Manufacturer: Schneider Electric

• Series: Modicon Momentum

• Type: M1 Processor Adapter (RS‑232, 32 MHz, LL984 only)

• Compatibility: All Modicon Momentum I/O bases (170XTS series)

• Status: Obsolete / Discontinued (spare parts only)

• Country of Origin: France

• Certifications: CE, UL, cUL, FM Class 1 Div 2, NEMA 250

3. Technical Specifications

Processor & Memory

• CPU: 32 MHz proprietary

• Flash: 256 KB (program storage)

• RAM: 64 KB (data + program execution)

• Program Memory (LL984): 18 KB

• Data Memory: 24 KB

• Scan Time: 0.63 ms per KB

• Word Length: 16‑bit

I/O Capacity

• Discrete I/O: 2048 inputs / 2048 outputs

• Register I/O: 2048 words in / 2048 words out

Communication Port

• RS‑232 (non‑isolated): DB9 connector, Modbus RTU/ASCII, slave only, up to 19.2 kbps

• Diagnostic LEDs: PWR (green), RUN (green), FLT (red), COMM (yellow)

Electrical

• Supply Voltage: 5 V DC ±5% (from Momentum I/O base)

• Power Consumption: ≤ 8 W

Environmental

• Operating Temperature: 0 °C to +40 °C (non‑condensing)

• Storage Temperature: −40 °C to +85 °C

• Humidity: 5–95% RH (non‑condensing)

• Vibration: 0.75 mm displacement, 1 g acceleration

• Shock: 15 g peak, 11 ms duration

• Altitude: Up to 2000 m (no derating)

Physical

• Dimensions (H × W × D): 25 mm × 125 mm × 183 mm

• Weight: 0.042 kg (0.09 lbs)

• Material: Lexan (industrial polycarbonate)

4. Key Features

• 32 MHz High‑Speed CPU: Faster scan time (0.63 ms/KB) vs. 171CCS70000 (1.0 ms/KB)

• RS‑232 Serial: Modbus RTU/ASCII slave for HMI/SCADA connection

• Compact & Lightweight: Easy installation on Momentum I/O bases

• Industrial Durability: Shock/vibration resistant, conformal coating

• Drop‑In Fit: Compatible with all Momentum 170XTS I/O bases

5. Applications

• Small‑to‑medium standalone PLC control with Momentum I/O

• Cost‑sensitive OEM machinery (conveyors, packaging, assembly lines)

• LL984‑based systems requiring RS‑232 Modbus slave communication

• Retrofit projects replacing older Modicon controllers

• Remote I/O control with serial HMI connection

6. Installation Instructions

1. Power Off: Disconnect power to the Momentum I/O base.

2. ESD Protection: Use anti‑static wristband when handling.

3. Mounting: Align adapter with I/O base connector; press firmly until seated. Tighten screws.

4. RS‑232 Wiring: Connect DB9 cable to HMI/SCADA; configure baud rate, data bits, parity, stop bits.

5. Power Up: Apply 5 V DC. Check LEDs: PWR ON, RUN blinking (program execution), COMM blinking (activity).

6. Programming: Download LL984 program via Concept, ProWORX 32, or Modsoft.

7. Compatibility

• I/O Bases: All 170XTS series Momentum discrete/analog I/O bases

• Software: LL984 only (Concept ≥ V2.1, ProWORX 32/NxT, Modsoft ≥ V2.5)

• Network: Modbus RTU/ASCII (RS‑232 slave only)

• Replacement: Superseded by 171CCS76000 (RS‑485) or 171CCC96030 (Ethernet + RS‑485)

8. Safety & Handling

• Installation/maintenance by qualified personnel per local codes.

• Disconnect power before wiring/service to avoid electric shock.

• Avoid water, moisture, corrosive substances, direct sunlight.

• Use ESD protection to prevent static damage.

• Do not open casing; no user‑serviceable parts inside.

9. Maintenance & Troubleshooting

• Inspection: Quarterly check for cracks, loose screws, damaged connectors, LED status.

• Cleaning: Dry, lint‑free cloth only; no solvents/abrasives.

• Common Issues:

  • PWR Off: Check 5 V DC supply from I/O base.

  • FLT On: CPU fault; re‑seat adapter, reload program, check I/O base.

  • COMM No Response: Verify RS‑232 wiring, baud rate, parity, slave address.

  • No Program Execution: Ensure program downloaded, RUN mode active, no fatal faults.

10. Replacement Information

• 171CCS76000: RS‑485 Modbus, 256 KB Flash, 0–60 °C

• 171CCC96030: Ethernet + RS‑485, IEC 61131‑3 + LL984, 1 MB Flash