1. General Description

2. Product Identification

• Model Number: 170FNT11001

• Series: Modicon Momentum

• Type: FIPIO Communication Adapter (STP/Fiber)

• Protocol: FIPIO (Factory Instrumentation Protocol)

• Connectors:

  • 1 × 9‑pin SUB‑D (STP, RS‑485)

  • 2 × SC/ST fiber ports (50/125 μm or 62.5/125 μm)

• Data Rate: 1 Mbps (fixed)

• Station Address: 2 rotary switches (1–99)

• LED Indicators: RUN (green), FLT (red)

• Dimensions (W × D × H): 125 × 45 × 100 mm

• Weight: 0.11 kg (0.24 lb)

• Protection Class: IP20

• Certifications: CE, UL, cUL, CSA, RoHS

3. Communication Specifications

• Network Protocol: FIPIO (WorldFIP)

• Data Rate: 1 Mbps (fixed)

• Topology: Multidrop (bus), star, or fiber ring

• Nodes per Segment:

  • STP: Max 31 devices (no repeater)

  • Fiber: Max 97 devices (with repeaters)

• Max Cable Length:

  • STP: 1,000 m

  • Fiber: 5,000 m (multi‑mode)

• Data Integrity: CRC‑16 checksum

• Isolation: Galvanic isolation (backplane ↔ FIPIO)

• Access Method: Producer/Consumer (deterministic)

• Supported PLCs: Premium, Quantum, TSX Telecontroller 40, APRIL CPU5030/5130

4. Electrical Specifications

• Power Supply: 24 VDC (from Momentum backplane)

• Current Consumption: ≤ 130 mA @ 24 VDC

• Voltage Range: 19.2 VDC to 28.8 VDC (±20%)

• Surge Protection: 600 W (Ethernet/fiber ports)

• Overcurrent Protection: 1.5 A

• EMC Compliance: IEC 61000‑6‑2/4 (industrial immunity)

5. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C (non‑condensing)

• Storage Temperature: −40 °C to +85 °C

• Relative Humidity: 5% to 95% (non‑condensing)

• Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)

• Shock: IEC 60068‑2‑27 (15 g, 11 ms)

• Altitude: Up to 5,000 m (derated above 2,000 m)

6. Key Features

• Dual Media Support: STP (1 km) + multi‑mode fiber (5 km)

• Long‑Distance Communication: Fiber extends range to 5,000 m

• Backplane‑Powered: No external power supply needed

• Rotary Addressing: Simple station address setup (1–99)

• LED Diagnostics: RUN/FLT for quick status check

• Galvanic Isolation: Protects backplane from fieldbus faults

• Compact Design: Fits standard Momentum I/O slots (IP20)

• Industrial Grade: High EMI immunity for harsh environments

7. Compatibility

• I/O Bases: All Modicon Momentum 170XBP series bases

• Controllers: Premium, Quantum, TSX Telecontroller 40, APRIL CPU5030/5130

• Configuration Software: XTEL V52/V6, Unity Pro (FIPIO)

• Cables:

  • STP: FIPIO‑compliant shielded twisted pair

  • Fiber: 50/125 μm or 62.5/125 μm multi‑mode

• Termination: Passive terminator (STP segment ends)

8. Installation & Operation

1. Power Off: Disconnect all system power before installation.

2. Mounting:

   • Insert adapter into Momentum I/O base’s communication slot.

   • Secure with integrated latch.

3. Address Setting:

   • Use two front rotary switches to set FIPIO station address (1–99).

4. Wiring:

   • STP: Connect FIPIO STP cable to 9‑pin SUB‑D; add terminators at both ends.

   • Fiber: Connect multi‑mode fiber to SC/ST ports; ensure proper TX/RX pairing.

5. Power On: Restore system power.

6. LED Status:

   • RUN (Green): On = Normal; Flashing = Initialization.

   • FLT (Red): On = Bus fault; Flashing = Configuration error.

9. Configuration

• Use XTEL V52/V6 or Unity Pro to configure as FIPIO slave.

• Match station address to rotary switches; map I/O data.

• Download configuration to PLC and adapter.

10. Maintenance

• Inspection: Every 6 months, check connections, LED status, cable/fiber integrity.

• Cleaning: Use dry cloth only; avoid moisture, dust, chemicals.

• Environment: Keep away from corrosive gases and condensation.

• Fiber Care: Avoid bending fiber beyond minimum radius; clean connectors regularly.

11. Safety Notes

• Qualified Personnel: Installation/maintenance by certified electricians only.

• Voltage Limits: Do not exceed 30 VDC on FIPIO interface.

• Isolation: Do not modify internal isolation barriers.

• Fiber Safety: Avoid looking into active fiber ports (laser hazard).

• Disposal: Dispose of module per local electronic waste regulations.

12. Troubleshooting

• FLT LED On: Check STP wiring/termination, fiber TX/RX swap, or address conflicts.

• No Communication: Verify station address, PLC configuration, backplane power, or fiber breakage.

• Data Errors: Check STP shielding/grounding, fiber contamination, or nearby EMI sources.