1. General Description

2. Product Identification

• Model: 170ANR12090

• Series: Modicon Momentum

• Type: 8-channel single-ended analog input module

• Channel quantity: 8 analog inputs

• Dimension: 125 × 47.5 × 141.5 mm

• Weight: 0.23 kg

• Protection class: IP20

• Certification: CE, UL, cUL, CSA, RoHS

• Isolation: 500 VAC between field and bus

• Indicator: Power and channel status LED

3. Electrical Specifications

Analog Input

• Resolution: 12 bit

• Selectable input signal range:

  4~20 mA, 0~20 mA, 1~5 V, 0~10 V

• Input impedance

  Current mode: 250 Ω

  Voltage mode: > 1 MΩ

• Basic accuracy: ±0.1 % full scale

• Temperature drift: ±0.005 % FS / °C

• Conversion time: 4 ms per channel

• Built-in noise filter, software configurable

Power Supply

• Supply voltage: 24 VDC ±10%

• Power consumption: 180 mA typical

• Max power dissipation: 3.5 W

4. Environmental Specifications

• Operating temperature: 0 °C ~ +60 °C, non-condensing

• Storage temperature: -40 °C ~ +85 °C

• Relative humidity: 5% ~ 95%, no condensation

• Vibration resistance: IEC 60068-2-6

• Altitude: Max 5000 m, power derating above 2000 m

• EMC compliance: Industrial standard immunity

5. Key Features

• 8 universal analog input channels, flexible range selection

• 12-bit high precision signal conversion

• Removable terminal block for easy wiring and replacement

• Snap-on installation for Momentum backplane

• Built-in surge and overvoltage protection

• Isolated design improves anti-interference capability

• Real-time LED status diagnosis

6. Compatibility

• Backplane: Momentum I/O rack

• Communication adapters: 170ENT, 170PBM, 170CPS series

• Compatible PLC: Quantum, Premium, M340, Momentum controller

• Configuration software: Unity Pro, SoMachine

• Wire specification: 14~22 AWG copper wire, torque 0.5~0.6 N·m

7. Application

• Process parameter monitoring: pressure, flow, liquid level, temperature

• Industrial factory automation

• Water treatment and energy monitoring system

• HVAC and building automatic control

• Material handling and packaging machine

8. Installation & Wiring

1. Cut off all power before installation

2. Clip module firmly onto Momentum base rack and ground properly

3. Current signal: Connect transmitter two wires to analog input terminals

4. Voltage signal: Connect sensor output to corresponding channel terminals

5. Use shielded twisted pair cable for analog wiring

6. Tighten terminal screws with standard torque

7. Power on and check LED working status

9. Maintenance

• Inspect terminal tightness and LED status every 6 months

• Keep module surface clean and dust-free

• Avoid corrosive gas, heavy vibration and damp environment

• Regular check cable shielding connection

10. Safety Notes

• Only qualified personnel perform wiring and maintenance

• Do not exceed rated input voltage and current range

• Keep isolation integrity between field side and control bus

• Separate analog cable from high power cable to avoid interference

• Dispose module according to local electronic waste regulation