1. General Description

2. Product Identification

• Model Number: 170ADO54050

• Series: Modicon Momentum

• Type: Discrete AC output base (Triac, 2×8 channels)

• Channel Configuration: 16 outputs (120 VAC, 47–63 Hz)

• Dimensions (W × D × H): 125 × 47.5 × 141.5 mm

• Weight: 0.284 kg

• Protection Class: IP20

• Certifications: CE, UL, cUL, CSA, FM Class 1 Division 2, RoHS

• Logic Type: Positive (true high)

• Isolation (Field ↔ Bus): 1780 VAC for 1 minute

• LED Indicators: 16 green LEDs (one per channel; on = active)

3. Electrical Specifications

Outputs (16 Channels, 120 VAC)

• Rated Voltage: 120 VAC (85–132 VAC operating range, 47–63 Hz)

• Output Type: Solid‑state (Triac)

• Current Rating:

  • Per channel: 1 A (continuous)

  • Per group (8 channels): 8 A

  • Per module (16 channels): 16 A

• Voltage Drop (On): ≤ 1.5 V @ 0.5 A

• Leakage Current (Off): ≤ 1.9 mA @ 120 VAC

• Minimum Load Current: 5 mA (per channel)

• Response Time: 0.5 line cycle (0 → 1 or 1 → 0)

• Surge Current:

  • 15 A for 1 cycle

  • 10 A for 2 cycles

  • 5 A for 3 cycles

• Protection: Per‑group 5 A slow‑blow internal fuses (2 fuses total)

• Inductive Loads: External RC snubber recommended for inductive loads > 100 mH

Power

• Supply Voltage: 24 VDC ±20% (logic power)

• Current Consumption: 125 mA @ 24 VDC (logic only)

• Power Dissipation: 6 W typical, 7.5 W maximum (logic + full load)

4. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C (32 °F to 140 °F), non‑condensing

• Storage Temperature: −40 °C to +85 °C, non‑condensing

• Relative Humidity: 5% to 95%, non‑condensing

• Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)

• Shock: IEC 60068‑2‑27 (15 g, 11 ms)

• Altitude: Up to 5000 m (derate above 2000 m)

• EMC: IEC 61000‑6‑2, IEC 61000‑6‑4 (industrial noise immunity)

5. Key Features

• 16 High‑Density Triac Outputs: 2×8 channels for 120 VAC control in compact footprint.

• 1 A Per Channel: Balanced current capacity for medium‑load AC devices.

• Grouped Protection: 5 A slow‑blow fuses per group for overload/short‑circuit safety.

• High Isolation: 1780 VAC isolation between field and bus circuits for safety.

• Fast Switching: 0.5 line‑cycle response for precise AC load control.

• Removable Terminal Blocks: Simplify wiring and module replacement.

• Snap‑On Mounting: Fast attachment to Momentum backplane.

• LED Status: 16 green LEDs for immediate channel status visibility.

6. Compatibility

• Backplane: Modicon Momentum I/O base rack.

• Adapters: 170ENT (Ethernet), 170PBM (Profibus), 170CPS (power supply) series.

• PLC Compatibility: Quantum, Premium, M340, Momentum controllers.

• Terminals: 14–22 AWG copper wire, torque 0.5–0.6 N·m.

• Busbar Support: Optional busbar for 3/4‑wire field devices.

7. Applications

• 120 VAC Actuators: Relays, contactors, solenoids, small AC motors (≤ 1 A).

• Industrial Control: Conveyors, pumps, valves, heaters, lighting systems.

• Building Automation: HVAC, fan control, access control, lighting systems.

• High‑Cycle Loads: Triac design ideal for frequent AC switching (no mechanical wear).

• Distributed I/O: Decentralized control in material handling, packaging, and machine tools.

8. Installation & Wiring

1. Power Off: Disconnect all system power before installation.

2. Mounting: Snap module firmly onto Momentum backplane; ensure proper grounding.

3. Wiring (Outputs – Triac/120 VAC):

   • Connect line (L1) to module 1L+ and 2L+ terminals.

   • Connect neutral (N) to module 1N and 2N terminals.

   • Connect load between OUT terminal and neutral (N).

4. Torque: Tighten terminals to 0.5–0.6 N·m (14–22 AWG copper wire).

5. Verification: Check connections; power on and confirm LED status (green = active).

9. Maintenance

• Periodic Inspection: Check terminal tightness and LED operation every 6 months.

• Cleaning: Keep surface free of dust and contaminants; use dry cloth only.

• Environment: Avoid corrosive gases, extreme vibration, or moisture.

• Fuse Check: Inspect internal fuses annually; replace with 5 A slow‑blow fuses if blown.

10. Safety Notes

• 120 VAC Hazard: Only qualified electricians should perform wiring; follow local electrical codes.

• Voltage Limits: Do not exceed 132 VAC on outputs.

• Current Ratings: Adhere to 1 A per channel / 16 A per module limits.

• Isolation: Maintain 1780 VAC isolation between field and bus circuits.

• Inductive Loads: Use external RC snubbers for inductive loads > 100 mH.

• Disposal: Dispose of module per local electronic waste regulations.