1. General Description

2. Product Identification

• Model Number: 170ADO35000

• Series: Modicon Momentum

• Type: Discrete DC output base (solid‑state, 2×16 channels)

• Channel Configuration: 32 outputs (24 VDC, sourcing)

• Dimensions (W × D × H): 125 × 47.5 × 141.5 mm

• Weight: 0.26 kg

• Protection Class: IP20

• Certifications: CE, UL, cUL, CSA, RoHS

• Logic Type: Positive (true high)

• Isolation (Field ↔ Bus): 4 kV (IEC 801‑2)

• LED Indicators: 32 green LEDs (one per channel; on = active)

3. Electrical Specifications

Outputs (32 Channels, 24 VDC)

• Rated Voltage: 24 VDC (20.4–28.8 VDC operating range)

• Output Type: Solid‑state (MOSFET), sourcing (PNP)

• Current Rating:

  • Per channel: 0.25 A (continuous)

  • Per group (16 channels): 4 A

  • Per module (32 channels): 8 A

• Voltage Drop (On): ≤ 0.5 V @ 0.5 A

• Leakage Current (Off): ≤ 100 µA @ 24 VDC

• Response Time:

  • 0 → 1: ≤ 1 ms

  • 1 → 0: ≤ 1 ms

• Maximum Output Frequency: 1 kHz

• Surge Current: 5 A for 1 ms (per channel)

• Protection: Per‑channel overcurrent/short‑circuit protection; automatic shutdown with LED fault indication

• Inductive Loads: Internal freewheeling diodes included

Power

• Supply Voltage: 24 VDC ±20% (20.4–28.8 VDC)

• Current Consumption: 90 mA @ 24 VDC (logic only)

• Power Dissipation: ≤ 4 W (logic + full load)

4. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C (32 °F to 140 °F), non‑condensing

• Storage Temperature: −40 °C to +85 °C, non‑condensing

• Relative Humidity: 5% to 95%, non‑condensing

• Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)

• Shock: IEC 60068‑2‑27 (15 g, 11 ms)

• Altitude: Up to 5000 m (derate above 2000 m)

• EMC: IEC 61000‑6‑2, IEC 61000‑6‑4; 8 kV air discharge, 10 V/m radiated immunity (80–1000 MHz)

5. Key Features

• 32 High‑Density Outputs: 2×16 channels for maximum I/O count in compact footprint.

• Sourcing (PNP) Outputs: Compatible with standard 24 VDC sinking inputs.

• Per‑Channel Protection: Overcurrent/short‑circuit protection with LED fault indication.

• High Noise Immunity: 4 kV isolation, enhanced ESD/surge suppression for harsh environments.

• Opto‑Isolation: 4 kV isolation between field and bus circuits.

• Removable Terminal Blocks: Simplify wiring and module replacement.

• Snap‑On Mounting: Fast attachment to Momentum backplane.

• LED Status: 32 green LEDs for immediate channel status visibility.

6. Compatibility

• Backplane: Modicon Momentum I/O base rack.

• Adapters: 170ENT (Ethernet), 170PBM (Profibus), 170CPS (power supply) series.

• PLC Compatibility: Quantum, Premium, M340, Momentum controllers.

• Terminals: 14–22 AWG copper wire, torque 0.5–0.6 N·m.

7. Applications

• High‑Density Control: Large systems requiring many 24 VDC outputs.

• 24 VDC Actuators: Relays, solenoids, contactors, small DC motors (≤ 0.25 A).

• Industrial Control: Conveyors, pumps, valves, heaters, lighting.

• Building Automation: HVAC, fan control, access control, lighting systems.

• High‑Cycle Loads: Solid‑state design ideal for frequent switching (no mechanical wear).

• Harsh Environments: Optimized for high‑electrical‑noise areas (MCC rooms, motor control centers).

8. Installation & Wiring

1. Power Off: Disconnect all system power before installation.

2. Mounting: Snap module firmly onto Momentum backplane; ensure proper grounding.

3. Wiring (Outputs – Sourcing/PNP):

   • Connect load negative (0 VDC) to load.

   • Connect load positive to module OUT terminal.

   • Connect COM terminal to +24 VDC.

4. Torque: Tighten terminals to 0.5–0.6 N·m (14–22 AWG copper wire).

5. Verification: Check connections; power on and confirm LED status (green = active).

9. Maintenance

• Periodic Inspection: Check terminal tightness and LED operation every 6 months.

• Cleaning: Keep surface free of dust and contaminants; use dry cloth only.

• Environment: Avoid corrosive gases, extreme vibration, or moisture.

• Output Check: For high‑cycle applications, verify voltage drop and leakage current annually.

10. Safety Notes

• 24 VDC Hazard: Only qualified electricians should perform wiring; follow local electrical codes.

• Voltage Limits: Do not exceed 28.8 VDC on outputs.

• Current Ratings: Adhere to 0.25 A per channel / 8 A per module limits.

• Isolation: Maintain 4 kV isolation between field and bus circuits.

• Inductive Loads: Internal freewheeling diodes provided; no external snubber required for most inductive loads.

• Disposal: Dispose of module per local electronic waste regulations.