1. General Description

2. Product Identification

• Model Number: 170ADM69050

• Series: Modicon Momentum

• Type: Discrete AC I/O base (solid‑state TRIAC outputs)

• Channel Configuration:

  • 10 inputs (120 VAC, 47–63 Hz, positive logic)

  • 8 outputs (120 VAC, TRIAC, 2 groups of 4)

• Dimensions (W × D × H): 125 × 47.5 × 141.5 mm

• Weight: 0.25 kg

• Protection Class: IP20

• Certifications: CE, UL, cUL, CSA, RoHS, Green Premium

• Logic Type: Positive (true high)

• Isolation (Field ↔ Bus): 500 VAC

3. Electrical Specifications

Inputs (10 Channels, 120 VAC)

• Rated Voltage: 120 VAC (74–132 VAC operating range)

• Frequency: 47–63 Hz

• Logic 0 (Low): ≤ 40 VAC

• Logic 1 (High): ≥ 74 VAC

• Input Current (High): ≥ 5.5 mA

• Input Resistance: 4 kΩ

• Response Time:

  • 0 → 1: ≤ 12.5 ms @ 60 Hz

  • 1 → 0: ≤ 12.3 ms @ 60 Hz

• Surge Withstand: 200 VAC (transient)

Outputs (8 Channels, TRIAC, 120 VAC)

• Rated Voltage: 120 VAC (108–132 VAC, 47–63 Hz)

• Output Type: Isolated TRIAC, non‑zero crossing

• Current Rating:

  • Per channel: 0.5 A (continuous)

  • Per group (4 channels): 2 A

  • Per module (8 channels): 4 A

• Leakage Current (Off): ≤ 1.3 mA @ 120 VAC

• Voltage Drop (On): ≤ 1.5 V @ 0.5 A

• Response Time:

  • 0 → 1: ≤ 12.5 ms @ 60 Hz

  • 1 → 0: ≤ 12.3 ms @ 60 Hz

• Protection: Overload, short‑circuit (per channel, LED fault indication)

Power

• Supply Voltage: 120 VAC ±10% (108–132 VAC, 47–63 Hz)

• Current Consumption: 160 mA @ 120 VAC

• Power Dissipation: ≤ 6 W (max)

4. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C (non‑condensing)

• Storage Temperature: −40 °C to +85 °C (non‑condensing)

• Relative Humidity: 5% to 95% (non‑condensing)

• Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)

• Shock: IEC 60068‑2‑27 (15 g, 11 ms)

• Altitude: Up to 5000 m (derate above 2000 m)

• EMC: IEC 61000‑6‑2, IEC 61000‑6‑4

5. Key Features

• 18 LED Indicators: 10 for input status, 8 for output status (green = on, red = fault)

• 120 VAC Native I/O: Eliminates need for AC/DC converters in 120 VAC panels

• TRIAC Outputs: Solid‑state, no mechanical wear, ideal for high‑cycle loads

• Removable Terminal Blocks: Simplify wiring and module replacement

• Snap‑On Mounting: Fast attachment to Momentum backplane

• Grouped Outputs: 2×4 TRIACs for independent load grouping

• Per‑Channel Protection: Overload/short‑circuit protection with LED fault indication

• Galvanic Isolation: 500 VAC isolation between field and bus circuits

6. Compatibility

• Backplane: Modicon Momentum I/O base rack

• Adapters: 170ENT (Ethernet), 170PBM (Profibus), 170CPS (power supply) series

• PLC Compatibility: Quantum, Premium, M340, Momentum controllers

7. Applications

• 120 VAC Sensors: Limit switches, pushbuttons, proximity sensors

• AC Actuators: Solenoids, contactors, relays, small motors (≤ 0.5 A)

• Building Automation: Lighting, HVAC, fan control (120 VAC)

• Industrial Control: Conveyors, pumps, heaters, low‑voltage switchgear

• High‑Cycle Loads: TRIACs ideal for frequent switching (no mechanical contacts)

8. Installation & Wiring

1. Power Off: Disconnect all system power before installation.

2. Mounting: Snap module firmly onto Momentum backplane; ensure proper grounding.

3. Wiring (Inputs – 120 VAC):

   • Connect 120 VAC line to input terminal; neutral to common (COM) terminal.

4. Wiring (Outputs – TRIAC):

   • Each TRIAC has OUT and COM terminals.

   • Connect load between OUT and COM; route 120 VAC line to COM, neutral to load.

   • For inductive loads: Install external RC snubber to suppress voltage spikes.

5. Torque: Tighten terminals to 0.5–0.6 N·m (14–22 AWG copper wire).

6. Verification: Check connections; power on and confirm LED status (green = active).

9. Maintenance

• Periodic Inspection: Check terminal tightness and LED operation every 6 months.

• Cleaning: Keep surface free of dust and contaminants; use dry cloth only.

• Environment: Avoid corrosive gases, extreme vibration, or moisture.

• Output Check: For high‑cycle applications, verify TRIAC leakage current annually.

10. Safety Notes

• 120 VAC Hazard: Only qualified electricians should perform wiring; follow local electrical codes.

• Voltage Limits: Do not exceed 132 VAC on inputs/outputs.

• Current Ratings: Adhere to 0.5 A per channel / 4 A per module limits.

• Isolation: Maintain 500 VAC isolation between field and bus circuits.

• Inductive Loads: Always use external RC snubbers to protect TRIAC outputs.

• Disposal: Dispose of module per local electronic waste regulations.