170ADM39010
Description
1. General Description
2. Product Identification
Model Number: 170ADM39010
Series: Modicon Momentum
Type: Discrete solid‑state I/O base (DC)
Channel Configuration:
16 monitored inputs (sinking, positive logic)
12 diagnostic outputs (sourcing, solid‑state)
Dimensions (W × D × H): 125 × 47.5 × 141.5 mm
Weight: 0.23 kg
Protection Class: IP20
Certifications: CE, UL, cUL, CSA, RoHS, Green Premium
Logic Type: Positive (true high)
Input Standard: IEC 61131‑2 Type 1
3. Electrical Specifications
Inputs (16 Channels, Monitored, Sinking)
Rated Voltage: 24 VDC (−3 VDC to +30 VDC range)
Logic 0 (Low): −3 VDC to 5 VDC
Logic 1 (High): 11 VDC to 30 VDC
Input Current (High): ≥ 2.5 mA
Input Resistance: 4 kΩ
Response Time:
0 → 1: ≤ 2.2 ms
1 → 0: ≤ 3.3 ms
Monitoring: Per‑channel open/short‑circuit detection
Outputs (12 Channels, Diagnostic, Sourcing, Solid‑State)
Rated Voltage: 24 VDC (≤ 30 VDC max)
Output Type: Sourcing (positive switching) solid‑state switch
Current per Point: 0.5 A (continuous)
Current per Module: 8 A (max)
Peak Current: 5 A (per point, short duration)
Leakage Current (Off): < 1 mA @ 24 VDC
Voltage Drop (On): < 0.5 V @ 0.5 A
Response Time: ≤ 0.1 ms (both directions)
Protection: Overload, short‑circuit (per channel)
Diagnostics: Per‑channel overcurrent, open‑load detection
Power
Supply Voltage: 24 VDC ±10% (19–30 VDC)
Current Consumption: 250 mA @ 24 VDC
Power Dissipation: 6.5 W (typical), ≤ 10 W (max)
Isolation (Channels ↔ Bus): 500 VAC
4. Environmental Ratings
Operating Temperature: 0 °C to +60 °C
Storage Temperature: −25 °C to +85 °C
Relative Humidity: 5% to 95% (non‑condensing)
Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)
Altitude: Up to 5000 m (derate above 2000 m)
5. Key Features
28 LED Indicators: 16 for input status, 12 for output status, plus error LEDs
Input Monitoring: Detects open/short circuits on each input channel
Output Diagnostics: Identifies overcurrent or open‑load conditions per output
Solid‑State Outputs: No moving parts; long life, high speed
Removable Terminal Blocks: Simplifies wiring and maintenance
Snap‑On Mounting: Quick attachment to Momentum backplane
Per‑Channel Protection: Overload/short‑circuit protection with LED fault indication
6. Compatibility
Backplane: Modicon Momentum I/O base rack
Adapters: 170ENT (Ethernet), 170PBM (Profibus), 170CPS (power supply) series
PLC Compatibility: Quantum, Premium, M340, Momentum controllers
7. Applications
24 VDC sensors (proximity, photo‑eye, limit switches) requiring fault monitoring
Solenoids, contactors, relays, and small DC motors needing diagnostic feedback
Factory automation, material handling, packaging machinery
Process control systems requiring high reliability and fault detection
8. Installation & Wiring
Power Off: Disconnect all system power before installation.
Mounting: Snap module firmly onto Momentum backplane; ensure proper grounding.
Wiring (Inputs – Sinking):
Connect +24 VDC from field device to input terminal; common (COM) to ground.
Wiring (Outputs – Sourcing):
Connect load between output terminal and ground (0 VDC).
For inductive loads: Install flyback diode across load to absorb voltage spikes.
Torque: Tighten terminals to 0.5–0.6 N·m (14–22 AWG copper wire).
Verification: Check connections; power on and confirm LED status and diagnostics.
9. Maintenance
Periodic Inspection: Check terminal tightness and LED operation every 6 months.
Cleaning: Keep surface free of dust and contaminants.
Environment: Avoid corrosive gases, extreme vibration, or moisture.
10. Safety Notes
Monitored Inputs: Verify sensor wiring to avoid false fault triggers.
Diagnostic Outputs: Use appropriate load types to ensure accurate fault detection.
Inductive Loads: Always use external suppression (diodes/snubbers) to protect outputs.
Qualified Personnel: Only trained electricians should perform wiring; follow local codes.
Disposal: Dispose of module per local electronic waste regulations.
Get a Quote