1. General Description

2. Product Identification

• Model Number: 170ADM37010

• Series: Modicon Momentum

• Type: Discrete solid‑state I/O base (DC)

• Channel Configuration:

  • 4 groups of 4 inputs (16 total)

  • 2 groups of 4 outputs (8 total)

• Dimensions (W × D × H): 125 × 47.5 × 141.5 mm

• Weight: 0.22 kg

• Protection Class: IP20

• Certifications: CE, UL, cUL, CSA, RoHS, Green Premium

• Logic Type: Positive (sink) logic

• Input Standard: IEC 61131‑2 Type 1

3. Electrical Specifications

Inputs (16 Channels, Sinking)

• Rated Voltage: 24 VDC (−3 VDC to +30 VDC range)

• Logic 0 (Low): −3 VDC to 5 VDC

• Logic 1 (High): 11 VDC to 30 VDC

• Input Current (High): ≥ 2.5 mA

• Input Resistance: 4 kΩ

• Response Time:

  • 0 → 1: ≤ 2.2 ms

  • 1 → 0: ≤ 3.3 ms

Outputs (8 Channels, Solid‑State, Sinking)

• Rated Voltage: 24 VDC (≤ 30 VDC max)

• Output Type: Sink (negative switching) solid‑state switch

• Current per Point: 2 A (continuous)

• Current per Group: 8 A (max)

• Current per Module: 16 A (max)

• Peak Current: 2.8 A (per point, short duration)

• Leakage Current (Off): < 1 mA @ 24 VDC

• Voltage Drop (On): < 0.5 V @ 2 A

• Response Time: < 0.1 ms (both directions)

• Protection: Overload, short‑circuit (per group)

Power

• Supply Voltage: 24 VDC ±10% (19–30 VDC)

• Current Consumption: 250 mA @ 24 VDC

• Power Dissipation: ≤ 10 W

• Isolation:

  • Input ↔ Output groups: 500 VAC

  • Field ↔ Bus: Defined by adapter

4. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C

• Storage Temperature: −40 °C to +85 °C

• Relative Humidity: 5% to 95% (non‑condensing)

• Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)

• Altitude: Up to 5000 m (derate above 2000 m)

5. Key Features

• 24 LED Indicators: 16 for input status, 8 for output status

• High‑Current Outputs: 2 A per point, 16 A total for heavy loads

• Fast Response: < 0.1 ms output switching for high‑speed control

• Removable Terminal Blocks: Simplifies wiring and maintenance

• Snap‑On Mounting: Quick attachment to Momentum backplane

• Grouped I/O: 4×4 inputs, 2×4 outputs for fault isolation

• Overload/Short‑Circuit Protection: Per group; automatic shutdown + LED fault indication

6. Compatibility

• Backplane: Modicon Momentum I/O base rack

• Adapters: 170ENT (Ethernet), 170PBM (Profibus), 170CPS (power supply) series

• PLC Compatibility: Quantum, Premium, M340, Momentum controllers

7. Applications

• 24 VDC sensors (proximity, photo‑eye, limit switches)

• High‑current solenoids, contactors, relays, and small DC motors

• Factory automation, material handling, packaging machinery

• Process control requiring fast, high‑current discrete outputs

8. Installation & Wiring

1. Power Off: Disconnect all system power before installation.

2. Mounting: Snap module firmly onto Momentum backplane; ensure proper grounding.

3. Wiring (Inputs – Sinking):

   • Connect +24 VDC from field device to input terminal; common (COM) per 4 inputs to ground.

4. Wiring (Outputs – Sinking):

   • Connect load between +24 VDC and output terminal.

   • For inductive loads: Install flyback diode across load to absorb voltage spikes.

5. Torque: Tighten terminals to 0.5–0.6 N·m (14–22 AWG copper wire).

6. Verification: Check connections; power on and confirm LED status.

9. Maintenance

• Periodic Inspection: Check terminal tightness and LED operation every 6 months.

• Cleaning: Keep surface free of dust and contaminants.

• Environment: Avoid corrosive gases, extreme vibration, or moisture.

10. Safety Notes

• High‑Current Outputs: Do not exceed 2 A per point or 16 A total ratings.

• Inductive Loads: Always use external suppression (diodes/snubbers) to protect outputs.

• Qualified Personnel: Only trained electricians should perform wiring; follow local codes.

• Disposal: Dispose of module per local electronic waste regulations.