1. General Description

2. Product Identification

• Model Number: 170ADM35015

• Series: Modicon Momentum

• Type: Discrete Solid‑State I/O Base (DC)

• Channel Configuration:

  • 1 group of 16 inputs (sinking)

  • 2 groups of 8 outputs (16 total, sourcing)

• Dimensions (W × D × H): 125 × 47.5 × 141.5 mm

• Weight: 0.23 kg

• Protection Class: IP20

• Certifications: CE, UL, cUL, CSA, RoHS

• Logic Type: True Low (negative logic: sinking inputs, sourcing outputs)

• Input Standard: IEC 61131‑2 Type 1

3. Electrical Specifications

Inputs (16 Channels, Sinking)

• Rated Voltage: 24 VDC (−3 VDC to +30 VDC range)

• Logic 0 (Low): −3 VDC to 5 VDC

• Logic 1 (High): 11 VDC to 30 VDC

• Input Current (High): ≥ 2.5 mA

• Input Resistance: 4 kΩ

• Response Time:

  • 0 → 1: ≤ 2.2 ms

  • 1 → 0: ≤ 3.3 ms

Outputs (16 Channels, Sourcing, Solid‑State)

• Rated Voltage: 24 VDC (≤ 30 VDC max)

• Output Type: Sourcing (positive switching) solid‑state switch

• Current per Point: 0.5 A (continuous)

• Current per Group: 4 A (max)

• Current per Module: 8 A (max)

• Peak Current: 5 A (per point, short duration)

• Leakage Current (Off): < 1 mA @ 24 VDC

• Voltage Drop (On): < 0.5 V @ 0.5 A

• Response Time: ≤ 0.1 ms (both directions)

• Protection: Overload, short‑circuit (per group)

Power

• Supply Voltage: 24 VDC ±10%

• Current Consumption: 250 mA @ 24 VDC

• Power Dissipation: ≤ 8 W

• Isolation (Channels ↔ Bus): 500 VAC

4. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C

• Storage Temperature: −25 °C to +85 °C

• Relative Humidity: 5% to 95% (non‑condensing)

• Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)

• Altitude: Up to 5000 m (derate above 2000 m)

5. Key Features

• 32 LED Indicators: 16 for input status, 16 for output status

• True Low Logic: Sinking inputs, sourcing outputs for direct compatibility with standard 24 VDC sensors/loads

• Solid‑State Outputs: No moving parts; long life, high speed

• Removable Terminal Blocks: Simplifies wiring and maintenance

• Snap‑On Mounting: Quick attachment to Momentum backplane

• Grouped Outputs: 2 × 8 channels for fault isolation and current sharing

• Overload/Short‑Circuit Protection: Per group; automatic shutdown + LED fault indication

6. Compatibility

• Backplane: Modicon Momentum I/O base rack

• Adapters: 170ENT (Ethernet), 170PBM (Profibus), 170CPS (power supply) series

• PLC Compatibility: Quantum, Premium, M340, Momentum controllers

7. Applications

• 24 VDC pushbuttons, limit switches, proximity sensors (sinking)

• Solenoids, contactors, relays, and small DC motors (sourcing)

• Factory automation, material handling, packaging machinery

• Infrastructure and energy systems requiring true‑low logic

8. Installation & Wiring

1. Power Off: Disconnect all system power before installation.

2. Mounting: Snap module firmly onto Momentum backplane; ensure proper grounding.

3. Wiring (Inputs – Sinking):

   • Connect positive (+24 VDC) of field device to input terminal; common (COM) per 8 inputs to ground.

4. Wiring (Outputs – Sourcing):

   • Connect load between output terminal and ground (0 VDC).

   • For inductive loads (solenoids, motors): Install flyback diode across load to absorb voltage spikes.

5. Torque: Tighten terminals to 0.5–0.6 N·m (14–22 AWG copper wire).

6. Verification: Check connections; power on and confirm LED status.

9. Maintenance

• Periodic Inspection: Check terminal tightness and LED operation every 6 months.

• Cleaning: Keep surface free of dust and contaminants.

• Environment: Avoid corrosive gases, extreme vibration, or moisture.

10. Safety Notes

• True Low Logic: Verify sensor/load polarity to avoid damage.

• Inductive Loads: Always use external suppression (diodes/snubbers) to protect outputs.

• Qualified Personnel: Only trained electricians should perform wiring; follow local codes.

• Disposal: Dispose of module per local electronic waste regulations.