1. General Description

2. Product Identification

• Model Number: 170ADM35011

• Series: Modicon Momentum

• Type: High‑Speed Discrete Solid‑State I/O Base (DC)

• Channel Configuration:

  • 1 group of 16 inputs

  • 2 groups of 8 outputs (16 total)

• Dimensions (W × D × H): 125 × 47.5 × 141.5 mm

• Weight: 0.2 kg

• Protection Class: IP20

• Certifications: CE, UL, cUL, CSA, RoHS, Green Premium

• Logic Type: Positive (sink) logic

• Input Standard: IEC 61131‑2 Type 1

3. Electrical Specifications

Inputs (16 Channels)

• Rated Voltage: 24 VDC (−3 VDC to +30 VDC range)

• Logic 0 (Low): −3 VDC to 5 VDC

• Logic 1 (High): 11 VDC to 30 VDC

• Input Current (High): ≈12 mA

• Input Resistance: 4 kΩ

• Response Time: 0.06 ms (typical, high‑speed)

Outputs (16 Channels, Solid‑State)

• Rated Voltage: 24 VDC (≤30 VDC max)

• Output Type: Sink (negative switching) solid‑state switch

• Current per Point: 0.5 A (continuous)

• Current per Group: 4 A (max)

• Current per Module: 8 A (max)

• Peak Current: 5 A (per point, short duration)

• Leakage Current (Off): <1 mA @ 24 VDC

• Voltage Drop (On): <0.5 V @ 0.5 A

• Response Time: ≤0.1 ms (0→1); ≤2 ms (1→0)

• Protection: Overload, short‑circuit (per group)

Power

• Supply Voltage: 24 VDC ±10%

• Current Consumption: 250 mA @ 24 VDC

• Power Dissipation: ≤8 W

• Isolation (Channels ↔ Bus): 500 VAC

4. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C

• Storage Temperature: −40 °C to +85 °C

• Relative Humidity: 5% to 95% (non‑condensing)

• Vibration: IEC 60068‑2‑6 (1 g, 10–150 Hz)

• Altitude: Up to 5000 m (derate above 2000 m)

5. Key Features

• 32 LED Indicators: 16 for input status, 16 for output status

• High‑Speed I/O: 0.06 ms input / 0.1 ms output response

• Solid‑State Outputs: No moving parts; long life, high speed

• Removable Terminal Blocks: Simplifies wiring and maintenance

• Snap‑On Mounting: Quick attachment to Momentum backplane

• Grouped Outputs: 2 × 8 channels for fault isolation and current sharing

• Overload/Short‑Circuit Protection: Per group; automatic shutdown + LED fault indication

• Green Premium: RoHS compliant, environmental transparency

6. Compatibility

• Backplane: Modicon Momentum I/O base rack

• Adapters: 170ENT (Ethernet), 170PBM (Profibus), 170CPS (power supply) series

• PLC Compatibility: Quantum, Premium, M340, Momentum controllers

7. Applications

• High‑speed 24 VDC sensors (proximity, photo‑eye)

• Fast‑acting solenoids, contactors, and small DC motors

• Factory automation, material handling, packaging machinery

• Infrastructure and energy systems requiring rapid I/O response

8. Installation & Wiring

1. Power Off: Disconnect all system power before installation.

2. Mounting: Snap module firmly onto Momentum backplane; ensure proper grounding.

3. Wiring (Inputs):

   • Connect 24 VDC field signals to input terminals; common (COM) per 8 inputs.

4. Wiring (Outputs):

   • Sink outputs: Connect load between positive (+24 VDC) and output terminal.

   • For inductive loads: Install flyback diode across load to absorb voltage spikes.

5. Torque: Tighten terminals to 0.5–0.6 N·m (14–22 AWG copper wire).

6. Verification: Check connections; power on and confirm LED status.

9. Maintenance

• Periodic Inspection: Check terminal tightness and LED operation every 6 months.

• Cleaning: Keep surface free of dust and contaminants.

• Environment: Avoid corrosive gases, extreme vibration, or moisture.

10. Safety Notes

• High Speed: Solid‑state outputs switch rapidly; do not exceed load ratings.

• Inductive Loads: Use external suppression (diodes/snubbers) to protect outputs.

• Qualified Personnel: Only trained electricians should perform wiring; follow local codes.

• Disposal: Dispose of module per local electronic waste regulations.