140XTS00212
May 23, 2026

140XTS00212

140XTS00212 is a 3.7 m (12 ft) factory‑terminated CableFast system cable for Schneider Electric Modicon Quantum I/O modules. It provides a ready‑made link between Quantum I/O and a 50‑pin SUB‑D interface, for standard power and signal wiring in industrial panels。

Description

1. General Description

140XTS00212 is a 3.7 m (12 ft) factory‑terminated CableFast system cable for Schneider Electric Modicon Quantum I/O modules. It provides a ready‑made link between Quantum I/O and a 50‑pin SUB‑D interface, for standard power and signal wiring in industrial panels。

2. Part Number & Identification

  • Model: 140XTS00212

  • Series: Modicon Quantum

  • Type: CableFast system cable, standard power

  • Length: 3.7 m (12 ft)

  • Color: Black

  • Net weight: 1.1 kg (2.43 lb)

  • Country of origin: China

  • Approvals: CE, UL, cUL, RoHS, REACH, Green Premium

  • Warranty: 18 months

  • UPC: 78590101405

  • Status: Phasing out / Discontinued

3. Electrical Characteristics

  • Cable: Multi‑conductor, shielded (EMI/RFI protection)

  • Connectors:

    • One end: Quantum I/O plug (female)

    • Other end: 50‑pin SUB‑D socket

  • Rated voltage: 300 VAC / 450 VDC

  • Rated current: 5 A per conductor (continuous)

  • Insulation resistance: > 10 MΩ

4. Mechanical Specifications

  • Jacket: Industrial PVC, flexible

  • Bend radius: 8× cable diameter (static); 12× (dynamic)

  • Termination: Factory crimped + strain relief

  • Locking: SUB‑D screw locks; Quantum snap‑lock

  • Pull strength: 100 N (22.5 lbf) max

5. Environmental Ratings

  • Operating temp: −20 °C to +70 °C (non‑condensing)

  • Storage temp: −40 °C to +85 °C

  • Humidity: 5–80 % RH (non‑condensing)

  • Altitude: 1,000 m (no derating)

  • Flame resistance: UL94 V‑0

6. Compatibility

  • PLC: Modicon Quantum only

  • Compatible I/O:

    • Terminal blocks: 140XTS00100 / 140XTS00200

    • Discrete: 140DAI/DAO/DDI/DDO

    • Analog: 140ACI/ACO/AVI/AVO

  • Not compatible with X80, M340, M580

7. Installation

  1. Power off I/O module and devices.

  2. Plug Quantum connector into module front port; push until snap‑lock clicks.

  3. Route cable to SUB‑D device; avoid sharp bends.

  4. Insert 50‑pin SUB‑D; tighten screws (0.8–1.0 N·m).

  5. Secure cable with ties; maintain min. bend radius.

  6. Verify connections before power‑up.

8. Maintenance

  • Inspection: Quarterly – check connectors, tightness, corrosion.

  • Cleaning: Wipe with dry cloth; no solvents.

  • Storage: Dry, clean area; avoid direct sunlight.

9. Safety

  • Indoor industrial use only.

  • Power off during install/removal.

  • Do not exceed rated voltage/current.

  • California Prop 65: Contains lead compounds; may cause cancer/reproductive harm.

10. Warranty

  • 18‑month manufacturer warranty against defects.


Get a Quote