1. Product Description

2. Part Number & Identification

• Model: 140XCP40200

• Product Line: Modicon Quantum

• Type: Rear rail / mounting bracket

• Size: 19‑inch width, 125 mm depth

• Net Weight: 3.56 kg (7.85 lb)

• Shipping Weight: ~5.0 kg (11.0 lb)

• Material: Heavy‑duty steel, galvanized finish

• Country of Origin: France

• Certifications: CE, UL, cUL; RoHS compliant

• UPC / EAN: 3595861127435

3. Mechanical Specifications

• Dimensions (H × W × D):

  • 180 mm × 320 mm × 125 mm

  • 7.09 in × 12.60 in × 4.90 in

• Mounting: Rear‑panel mount (4 × M6 screw holes)

• Rack Compatibility: 140XBP01000 (10‑slot) and all Quantum 140XBP series backplanes

• Shock Resistance: Up to 15G (X, Y, Z axes)

• Vibration: Compliant with IEC 60068‑2‑6 (10–55 Hz)

4. Environmental Ratings

• Operating Temperature: 0 °C to +60 °C

• Storage Temperature: −40 °C to +85 °C

• Humidity: 5 % to 95 % RH, non‑condensing

• Altitude: Up to 2,000 m (6,562 ft) above sea level

5. Compatibility

• Backplanes: Quantum 140XBP series (e.g., 140XBP01000, 140XBP01600)

• Cabinets: Standard 19” industrial racks, 125 mm deep enclosures

• Application: Fixed rear‑mount installation of Quantum PLC racks in control panels, industrial cabinets

6. Installation Instructions

1. Cabinet Preparation

   • Ensure 19” rear mounting rails are clean, secure, and properly aligned.

2. Bracket Positioning

   • Place the 140XCP40200 onto the cabinet’s rear rails.

   • Align the four M6 mounting holes.

3. Securing the Bracket

   • Fasten with 4 × M6 screws (torque: 2.5–3.0 N·m).

   • Verify the bracket is level and rigidly fixed.

4. Mounting the Backplane

   • Slide the Quantum backplane (e.g., 140XBP01000) into the bracket’s guides.

   • Secure the backplane with captive screws.

5. Cable Routing

   • Route I/O, power, and communication cables with minimum bend radius.

   • Maintain ≥ 10 cm separation from high‑voltage wiring.

7. Maintenance

• Inspection: Every 6 months – check for loose fasteners, corrosion, or deformation.

• Cleaning: Wipe with a dry cloth; avoid harsh chemicals.

• Torque Check: Annually re‑torque mounting screws to 2.5–3.0 N·m.

8. Safety Guidelines

• Qualified Personnel Only: Installation by trained electricians or panel builders.

• De‑Energized Installation: Mount bracket and backplane only when system power is OFF.

• Load Rating: Do not exceed the bracket’s maximum designed load capacity.

• Documentation: Maintain consistent labeling with electrical schematics and as‑built drawings.

9. Warranty

• 12‑month manufacturer warranty against defects in materials and workmanship.