• Weight: approx. 2.18 kg

• Color: Black outer jacket

• Origin: France

• Certifications: CE, UL, cUL; Green Premium compliant

3. Interface Description

• Module End: 1 × 50‑pin SUB‑D male connector (locks to Quantum module)

• Field End: 40 color‑coded pigtail leads (stripped/tinned ends)

• Cable Construction: Shielded twisted pair (STP), multi‑strand copper conductors

• Shield: Overall foil + braid shield (improved EMC performance)

4. Compatible Quantum Modules

• Digital input/output modules

• Analog input/output modules

• High‑speed counter/encoder modules

• Communication and specialty function modules

5. Technical Specifications

Electrical

• Conductor: Stranded copper

• Insulation: PVC, industrial grade

• Voltage Rating: 300 V (industrial control)

• Current Rating: 1 A per lead (typical)

Environmental

• Operating Temperature: 0 °C to +60 °C

• Storage Temperature: −40 °C to +85 °C

• Humidity: 5–80 % RH, non‑condensing

• Altitude: ≤ 1,000 m (no derating)

• Flammability: UL 94 V‑0

Mechanical

• Outer Jacket: Black, flame‑retardant PVC

• Bend Radius: ≥ 8 × cable diameter

• Termination: SUB‑D male with locking screws; tinned pigtail ends

6. Installation Instructions

1. Module Connection

   • Align the 50‑pin SUB‑D male with the module’s female port.

   • Insert firmly and tighten the two captive screws (torque to 0.5–0.8 N·m).

2. Field Wiring

   • Route cable away from high‑voltage/power cables (maintain ≥ 10 cm separation).

   • Connect pigtail leads to terminal blocks per color code and module pinout.

   • Keep unused leads insulated and secured.

3. Shield Grounding (Critical)

   • Connect the cable shield to chassis earth at one end only (cabinet side).

   • Avoid double grounding to prevent ground loops.

7. Pinout & Color Code

• The 50‑pin SUB‑D carries signals for up to 40 I/O points; 10 pins are reserved/not connected.

• Each of the 40 pigtails has a unique color (refer to your Quantum module’s user manual for pin‑to‑color mapping).

8. Maintenance & Handling

• Routing: Avoid sharp bends, crushing, or abrasion.

• Inspection: Periodically check connector tightness, insulation, and shield continuity.

• Replacement: Replace if jacket is damaged, connectors are worn, or insulation is compromised.

9. Safety & EMC Guidelines

• Qualified Personnel Only: Installation and service must be performed by authorized electricians.

• Isolate Power: Disconnect all system power before connecting/disconnecting the cable.

• EMC Compliance: Use shielded cables, proper grounding, and separation from power circuits to meet CE/UL requirements.

• Industrial Use Only: Designed for industrial control systems; not for life‑safety applications without additional safety measures.

10. Related Part Numbers (Same Series)

• 140XCA10106: 1.0 m length

• 140XCA10206: 1.8 m length

• 140XCA10306: 3.0 m length

• 140XCA10215: 4.6 m (15 ft) length (this model)

11. Warranty

• 1‑year manufacturer warranty against defects in materials and workmanship.