140XBP01600C
Description
1. Product Overview
2. Key Features
16 module slots: compatible with all standard Quantum CPU, I/O, communication, and bus modules.
Conformal coated PCB: Humiseal 1A33 acrylic coating rated UL 94 V‑0 for superior corrosion and humidity resistance.
High‑speed 32‑bit backplane: 100 Mbps bandwidth with low latency.
Integrated power distribution: +5 V for logic and ±12 V for I/O rails to each slot.
Hot‑swap capable: allows insertion or removal of modules while the system is powered.
Multi‑rack expansion: works with 140XBE10000 and 140XBE10000C expanders.
Robust metal chassis: provides immunity to industrial vibration and electrical noise.
Compliance: CE, UL, cUL certified; RoHS and REACH compliant.
3. Technical Specifications
General
Model: 140XBP01600C
Type: 16‑slot conformal coated backplane
Slots: 16 (standard Quantum form factor)
Bus: 32‑bit high‑speed extension bus
Current draw: approx. 4000 mA (from rack PSU)
Power rails: +5 V (logic), ±12 V (I/O)
Weight: approx. 1.6 kg (3.53 lb)
Mounting: Quantum rack rails or panel‑mount kit
Environmental
Operating temperature: 0 °C to +60 °C
Storage temperature: −40 °C to +85 °C
Humidity: 10–95 % RH, non‑condensing
Altitude: ≤1,000 m (no derating)
Protection: IP20 (front); conformal coated PCB
Vibration: 10–150 Hz, 0.15 mm amplitude
Shock: 15 g, 11 ms half‑sine
Corrosion resistance: salt mist and industrial gas resistant (coated)
Mechanical
Dimensions (W×H×D): 780 × 290 × 51 mm
Material: metal chassis, FR4 PCB with Humiseal 1A33 conformal coating
Connector: high‑density edge connector (module interface)
4. LED Indicators (on Modules, not Backplane)
PWR (Green): module power is healthy.
RUN (Green): module active, backplane communication normal.
FAULT (Red): module or backplane fault detected.
LINK (Yellow): backplane data activity.
5. Installation & Wiring
Rack Installation
Align 140XBP01600C with Quantum rack rails.
Slide into position and secure with mounting screws (torque per specifications).
Insert modules into slots 1–16 until latched.
For multi‑rack systems, connect backplane cables between 140XBP and 140XBE expanders.
Power & Grounding
Power: supplied by rack PSU; no direct user wiring to backplane required.
Ground: connect chassis to system earth ground.
Cable routing: separate signal and power cables; use shielded cables in high‑noise areas.
6. Configuration (Unity Pro)
Open Unity Pro V7.0 or later.
In hardware config, add a 16‑slot rack and assign 140XBP01600C.
Insert I/O modules into slots 1–16.
Configure I/O addresses, diagnostics, and fault handling.
Download to CPU; backplane initializes automatically.
7. Operation & Diagnostics
Normal Operation
All module PWR/RUN LEDs ON, FAULT LEDs OFF.
Stable power and communication provided to all 16 slots.
Fault Conditions
Module FAULT ON: check seating, connector, or module failure.
No PWR: verify rack PSU and backplane voltage rails.
Comm errors: inspect cables, expanders, and grounding.
Diagnostic Data
Backplane voltage status (+5 V, ±12 V).
Module presence/absence flags.
Bus communication quality metrics.
8. Maintenance
Monthly: inspect module seating, LEDs, and cables.
Quarterly: check screw torque; clean connectors with compressed air only.
Semi‑annually: verify ground continuity and shield integrity.
Replacement: replace if connectors damaged or corrosion present.
9. Safety & Compliance
Qualified personnel only for installation, wiring, and maintenance.
Disconnect all power before servicing.
For industrial control systems only; not for direct life‑safety applications without safety layers.
Follow local codes and EMC guidelines.
10. Compatibility
Quantum CPUs: 140CPU65150, 140CPU67160, 140CPU68060, 140CPU69060+.
Expanders: 140XBE10000, 140XBE10000C.
I/O modules: all standard Quantum digital/analog, safety, and specialty modules.
Racks: compatible with Quantum 12/14/16‑slot systems.
140XBP01600 vs 140XBP01600C
140XBP01600: standard (non‑coated), for clean/dry environments.
140XBP01600C: conformal coated (Humiseal 1A33), for harsh/corrosive environments。
Get a Quote