140DDM39000
Description
140DDM39000
Modicon Quantum 24VDC Mixed I/O Module
16 Inputs / 8 Outputs, Solid State Output, Standard Non-Coated
1. General Description
Manufacturer: Schneider Electric
Series: Modicon Quantum 140 Series
Module Type: 24VDC Mixed I/O Module
Input Quantity: 16 points, 2 groups × 8 channels
Output Quantity: 8 points, 2 groups × 4 channels, solid state sink type
Slot Occupation: 1 slot, hot swappable
Surface Treatment: Standard non-coated
Approximate Weight: 0.45kg
Application: On-site switch signal acquisition and low-power DC actuator control
2. Electrical Specifications
Input Section
Rated Voltage: 24 VDC
Operating Voltage Range: 18 ~ 30 VDC
Logic Low Level: -3 ~ 5 VDC
Logic High Level: 15 ~ 30 VDC
Input Current: ≥2mA for ON, ≤0.5mA for OFF
Input Impedance: 2.5 kΩ
Response Time: ≤1 ms
Isolation Voltage: 500 Vrms 1 minute between groups
Output Section
Rated Working Voltage: 19.2 ~ 30 VDC
Single Channel Rated Current: 0.5 A
Maximum Current Per Group: 2 A
Total Module Max Load Current: ≤4 A
Voltage Drop: 0.4 V at 0.5A load
Response Time: ≤1 ms
Built-in 5A group fuse and transient surge suppression
Peak Surge Current: 5A / 500μs
Max Inductive Load: 500 mH at 4Hz
Off-state Leakage Current: ≤0.4 mA @30VDC
Backplane Power
Backplane Current Consumption: 330 mA
3. LED Indicators
IN0~IN15 Green LED: Individual input channel status
OUT0~OUT7 Green LED: Individual output channel status
ACTIVE Green LED: Normal module bus communication status
4. Environmental Conditions
Operating Temperature: 0°C ~ +60°C
Storage Temperature: -40°C ~ +85°C
Relative Humidity: 5% ~ 95%, non-condensing
Working Altitude: ≤2000m, power derating required above 2000m
ESD Immunity: Contact 4kV, Air 8kV
Protection Degree: IP20
5. Mechanical Structure & Wiring
Dimensions: 35 × 122 × 52 mm
Connection Type: Screw terminal block
Applicable Wire Size: 0.5 ~ 2.5 mm²
Independent common terminal for each group
6. Address Allocation
Supported Software: Unity Pro, Concept, ProWORX 32
Input Address Range: %I0 ~ %I15
Output Address Range: %Q0 ~ %Q7
7. Model Difference
140DDM39000: Standard non-coated, used in normal industrial environment
140DDM39000C: Conformal coated, suitable for humid, dusty and corrosive harsh environment
Get a Quote