1. Overview

2. Features

• 8 isolated analog output channels (individually isolated)

• Output ranges (per channel, software configurable):

  • 4–20 mA (default)

  • 0–20 mA

  • 0–10 VDC

• SIL 3 (IEC 61508) with TÜV certification

• Redundancy: TMR, Dual, Simplex supported

• Channel diagnostics: open/short circuit, overload, load monitoring, reverse current

• HART pass‑through (read device status/diagnostics)

• User‑configurable fail‑safe: hold last state / safe value / custom value

• Hot‑swap (online replacement)

• Conformal coated for harsh environments

• Dedicated FTA: T9852

3. Electrical Specifications

Output

• Channels: 8 (isolated)

• Ranges: 4–20 mA, 0–20 mA, 0–10 VDC

• Resolution: 12‑bit

• Accuracy: ±0.1% FS @ 25 °C

• Load (current): 0–600 Ω

• Load (voltage): ≥ 1 kΩ

• Update rate: 100 ms typical

• Short‑circuit / overload protected per channel

Isolation

• Channel‑to‑channel / channel‑to‑backplane: ±1.5 kVDC, 1 minute

Backplane

• Supply: 18–32 VDC (redundant)

• Power dissipation: 3.6 W max (12.3 BTU/h)

• Backplane current: 200 mA max

4. Mechanical

• Form: Single‑width 6U module (T9100 chassis)

• Slots: Any slot 1–12; hot‑swap capable

• Weight: ~0.29 kg (10 oz)

• FTA: T9852 (field terminal assembly)

5. Environmental

• Operating temperature: −40 °C to +70 °C

• Storage: −40 °C to +85 °C

• Humidity: 5–95 % RH, non‑condensing

6. Safety & Approvals

• IEC 61508 SIL 3 (TÜV)

• Approvals: CE, UL, CSA, ATEX, IECEx, TÜV, CCC

7. Front Panel LEDs

• PWR (Green): Power OK

• RUN (Green): Module operational

• FAULT (Red): Module/channel fault

• CH1–CH8: Channel status / fault indication

8. Installation & Wiring

1. Insert into any T9100 slot (hot‑swap supported).

2. Connect front T9852 FTA.

3. Wire analog devices/valves/positioners to T9852 terminals.

4. Use shielded twisted pair for noise immunity.

5. Configure via AADvance Workbench (range, scaling, diagnostics, fail‑safe, HART).

9. Ordering Information

• T9482: 8‑Channel Isolated Analog Output Module (SIL 3)

• T9852: FTA for T9481 / T9482

• T9100: AADvance 6U/12‑slot chassis

• T9110: AADvance Safety Processor