1. Introduction

2. Main Features

• 16 analog input channels, individually isolated

• Input signals: 4–20 mA (default), 0–20 mA, ±10 V, ±5 V, 0–10 V (configurable)

• 16‑bit resolution, ±0.05% FS accuracy typical

• Channel‑to‑backplane isolation: 500 VDC

• HART command #03 supported (read device status)

• Full diagnostics: open/short circuit, over/under range, line fault

• Hot‑swap capable (online replacement)

• Conformal coated for harsh environments

• Dedicated FTA: T9832Rockwell Automation

• Scan times: Simplex 1.170 ms / Dual 1.965 ms / Triple 2.656 ms

3. Technical Specifications

Electrical

• Channels: 16 (isolated)

• Current input: 0–24 mA (4–20 mA nominal), input resistance 125 Ω

• Voltage input: ±10 V, ±5 V, ±2.5 V, ±1 V, 0–10 V, 0–5 V, 1–5 V

• Resolution: 16 bit

• Accuracy: ±0.05% FS (25 °C)

• Isolation: 500 VDC (field ↔ logic)

• Backplane supply: 18–32 VDC, 260 mA maxRockwell Automation

• Power consumption: 4.0 W max

Mechanical

• Form: Single‑width 6U module (T9100 chassis)

• Installation: Any slot (1–12), hot‑swap

• Matching FTA: T9832Rockwell Automation

• Weight: ~0.34 kg

Environmental

• Operating temperature: –40 °C to +70 °C

• Storage temperature: –40 °C to +85 °C

• Humidity: 5–95% RH, non‑condensing

• Vibration/shock: AADvance industrial standard

Safety & Certification

• Safety: IEC 61508 SIL 3 (TÜV certified)

• Approvals: CE, UL, CSA, ATEX, IECEx, TÜV

4. Front Panel Indicators

• PWR (Green): Power OK

• RUN (Green): Module active

• FAULT (Red): Module/channel fault

• CH1–CH16: Per‑channel status (signal/fault)

5. Installation & Wiring

1. Insert into any T9100 slot (hot‑swap supported)

2. Connect front FTA T9832Rockwell Automation

3. Field transmitters (4–20 mA / voltage) wire to T9832 terminals

4. Use shielded twisted pair for analog signals

5. Configure via AADvance Workbench (range, diagnostics, scan time)

6. Ordering Information

• T9432: 16CH Analog Input Module (isolated, 4–20 mA / voltage)

• T9832: Dedicated FTA for T9432Rockwell Automation

• T9100: AADvance 6U/12‑slot chassis

• T9110: AADvance safety processor