1. Introduction

• Function: 40‑channel TMR analog output (current/voltage, conformal coated)

• Channels: 40 independent analog outputs, TMR‑voted per channel

• Output Ranges: 4–20 mA (default), 0–20 mA, 0–10 VDC (configurable)

• Accuracy: ±0.1% FS typical, ±0.25% FS max

• Resolution: 12‑bit

• Safety: IEC 61508 SIL 3 (TÜV), CE, UL, CSA, ATEX, IECEx

• Architecture: 3‑2‑0 TMR, TriVote™ majority voting, single‑fault safe

• Isolation: 2500 VDC opto‑galvanic (field ↔ system)

• Diagnostics: Open/short circuit, overload, TMR mismatch, range fault

• SOE: 1 ms time‑stamp resolution (output state changes/faults)

• Hot‑swap: Supported (Companion Slot / SmartSlot)

• Operating Temp: –40 °C to +70 °C (extended harsh range)

2. Product Overview

• Conformal coated PCB and components (acrylic resin) for corrosion/moisture/dust protection

• Extended operating temperature: –40 °C to +70 °C (vs 0 °C to +60 °C for T8480)

• Enhanced resistance to salt mist, chemical vapors, condensation, and particulate contamination

• Same TMR core, I/O performance, and safety certification as T8480

• 40 TMR analog outputs: 4–20 mA (default), 0–20 mA, 0–10 VDC configurable

• High accuracy: ±0.1% FS typical, ±0.25% FS max; 12‑bit resolution

• TMR voting: auto‑corrects single‑slice faults; no single point of failure

• Per‑channel diagnostics: open/short circuit, overload, stuck fault detection

• High‑speed SOE: 1 ms resolution for output changes and fault events

• Hot‑swap & hot‑standby: online replacement without safety loop interruption

• Wide‑range safety certification: SIL 3, ATEX/IECEx for hazardous areas (with external barriers)

3. Specifications

3.1 Mechanical

• Form Factor: T8000 chassis single‑width module, 6U height

• Dimensions (H × W × D): 266 mm × 31 mm × 303 mm

• Weight: Approx. 1.30 kg

• Mounting: T8100 / T8400 chassis slots 1–16

• Termination: T8880 FTA (40‑Channel Analog Output FTA)

• Protection: Conformal coated (acrylic) PCB and components

3.2 Electrical

• System Supply: 20–32 VDC (nominal 24 VDC)

• Power Consumption: ≤ 28 W (system)

• Field Supply: Isolated, derived from system power (no external field power required)

• Channels: 40, TMR‑voted per channel

• Output Ranges (configurable per channel):

  • 4–20 mA (default)

  • 0–20 mA

  • 0–10 VDC

• Current Output (4–20 mA / 0–20 mA):

  • Compliance Voltage: ≥ 12 VDC @ 20 mA

  • Load Resistance: 0–600 Ω

  • Resolution: 12‑bit (≈ 4 µA step @ 4–20 mA)

  • Accuracy: ±0.1% FS typical, ±0.25% FS max @ 25 °C

• Voltage Output (0–10 VDC):

  • Load Resistance: ≥ 1 kΩ

  • Resolution: 12‑bit (≈ 2.4 mV step @ 0–10 V)

  • Accuracy: ±0.1% FS typical, ±0.25% FS max @ 25 °C

• Isolation: 2500 VDC opto‑galvanic (field ↔ system)

• Leakage Current: < 10 µA (channel off)

• Short Circuit Protection: Electronic latching, per‑channel shutdown

• Update Rate: 100 ms (configurable)

3.3 Functional

• Redundancy: TMR (3 slices, 3‑2‑0 fault tolerance)

• Voting: TriVote™; auto‑corrects single‑slice faults

• Channel Type: Dedicated analog output (software‑configurable range)

• Diagnostics:

  • Open/short circuit detection (per channel)

  • Overload / overvoltage protection (per channel)

  • TMR mismatch & drift monitoring

  • Stuck output / range fault detection

  • On‑board BIST (self‑test interval: 5 minutes)

• SOE Resolution: 1 ms (output changes, faults, trips)

• Response Time: ≤ 100 ms (command to stable output)

• Fault Tolerance: Single‑channel/slice fault does not affect safety function

3.4 Environmental (Enhanced for Harsh Conditions)

• Operating Temperature: –40 °C to +70 °C

• Storage Temperature: –40 °C to +85 °C

• Humidity: 5–95 % RH, non‑condensing (coating reduces condensation risk)

• Vibration: 10–57 Hz ±0.075 mm; 57–150 Hz 1.0 g

• Shock: 15 g, ½ sine wave, 11 ms

• Hazardous Area: ATEX / IECEx Ex ia IIC T4 Ga (with external safety barriers)

• Chemical Resistance: Resists salt mist, oil vapors, and common industrial gases

3.5 Safety & Certification

• Safety Standard: IEC 61508 SIL 3 (TÜV Certified)

• Approvals: CE, UL, CSA, ATEX, IECEx, FM

• Fault Tolerance: TMR 3‑2‑0; single‑fault safe

• PFHd: < 1.0 × 10⁻⁹ / hour (SIL 3)

4. Front Panel Indicators

• PWR (Green): ON = module power healthy

• RUN (Green): ON = active; FLASHING = BIST/initialization

• FAULT (Red): ON = critical fault; FLASHING = minor fault

• COM (Green): FLASHING = backplane communication active

• CH1–CH40 LEDs: Per‑channel status (ON = active; FLASH = fault)

5. Installation

• Chassis: Insert into any vacant slot in T8100 / T8400 chassis

• Hot‑Swap: Supported (Companion Slot / SmartSlot)

• Front‑Panel Screws: Torque 0.8–1.0 Nm

• Termination: Connect to T8880 FTA (standard or Ex ia with barriers)

• Environmental Note: T8480C is mandatory for sites with > 85 % RH, corrosive vapors, salt mist, or temperature extremes

6. Wiring

• Output Channels: To analog actuators, valve positioners, indicators (4–20 mA / 0–10 V)

• Field Power: Isolated from system; no external field supply required

• Isolation: Field side isolated 2500 VDC from system/backplane

• Wire Gauge: 16–22 AWG, stranded, with suitable insulation for Ex areas

• Safety Note: For hazardous areas, use approved intrinsic safety barriers between module and field devices

7. Ordering Information

• T8480: Standard 40‑channel TMR analog output module (0 °C to +60 °C)

• T8480C: Conformal coated 40‑channel TMR analog output module (–40 °C to +70 °C, harsh environments)

• T8880: Dedicated 40‑channel analog output FTA for T8480 / T8480C (standard or Ex ia)

• T8100 / T8400: Trusted system chassis