1. Introduction

• Function: 16‑channel TMR digital output (120 VAC, solenoid/contactor drive, conformal coated)

• Channels: 16 × 120 VAC digital outputs, grouped into 2 × 8‑channel isolated power groups

• Outputs: 90–132 VAC range, 1.0 A continuous per channel; 8 A max per power group

• Safety: IEC 61508 SIL 3 (TÜV), CE, UL, CSA, ATEX, IECEx

• Architecture: 3‑2‑0 TMR, TriVote™ majority voting, single‑fault safe

• Isolation: 2500 VAC opto‑galvanic (field ↔ system); 1500 VAC reinforced (group ↔ group)

• Diagnostics: Open/short circuit, overload, TMR mismatch, load fault

• SOE: 1 ms time‑stamp resolution (output state changes/faults)

• Hot‑swap: Supported (Companion Slot / SmartSlot)

• Operating Temp: –40 °C to +70 °C (extended harsh range)

2. Product Overview

• Conformal coated PCB and components (acrylic resin) for corrosion/moisture/dust protection

• Extended operating temperature: –40 °C to +70 °C (vs 0 °C to +60 °C for T8472)

• Enhanced resistance to salt mist, chemical vapors, condensation, and particulate contamination

• Same TMR core, I/O performance, and safety certification as T8472

• 16 TMR digital outputs: 90–132 VAC (120 VAC nominal), 1.0 A continuous, for 120 VAC solenoids/relays/contactor coils

• 2 isolated power groups: 8 channels each, 8 A max per group, fault isolation

• TMR voting: auto‑corrects single‑slice faults; no single point of failure

• Per‑channel diagnostics: open/short circuit, overload, stuck on/off detection

• High‑speed SOE: 1 ms resolution for output state changes and fault events

• Hot‑swap & hot‑standby: online replacement without safety loop interruption

• Wide‑range safety certification: SIL 3, ATEX/IECEx for hazardous areas (with external barriers)

3. Specifications

3.1 Mechanical

• Form Factor: T8000 chassis single‑width module, 6U height

• Dimensions (H × W × D): 266 mm × 31 mm × 303 mm

• Weight: Approx. 1.40 kg

• Mounting: T8100 / T8400 chassis slots 1–16

• Termination: T8872 FTA (120 VAC Digital Output FTA)

• Protection: Conformal coated (acrylic) PCB and components

3.2 Electrical

• System Supply: 20–32 VDC (nominal 24 VDC)

• Power Consumption: ≤ 26 W (system); ≤ 22 W (field @ 120 VAC, 1.0 A/channel)

• Field Supply (Outputs): 90–132 VAC (nominal 120 VAC), 50/60 Hz

• Channels: 16, grouped into 2 × 8‑channel isolated power groups

• Output Rating: 1.0 A continuous per channel; 3.0 A peak surge

• Group Rating: 8 A max per power group

• Output Voltage Range: 90–132 VAC (operating); –150 to 150 VAC (withstand)

• Isolation: 2500 VAC opto‑galvanic (field ↔ system); 1500 VAC reinforced (group ↔ group)

• Leakage Current (Output Off): < 150 µA @ 120 VAC

• On‑State Voltage Drop (Output): ≤ 2.0 VAC @ 1.0 A

• Short Circuit Protection: Electronic latching, automatic per‑channel shutdown

• Minimum On‑State Load Current: 40 mA

3.3 Functional

• Redundancy: TMR (3 slices, 3‑2‑0 fault tolerance)

• Voting: TriVote™; auto‑corrects single‑slice faults

• Channel Type: Dedicated digital output (no input configuration)

• Diagnostics:

  • Open/short circuit detection (per channel)

  • Overload / overcurrent protection (per channel/group)

  • TMR mismatch & drift monitoring

  • Stuck on/off failure detection

  • On‑board BIST (self‑test interval: 5 minutes)

• SOE Resolution: 1 ms (output state changes, faults, trips)

• Response Time: ≤ 0.8 ms (command to output)

• Fault Tolerance: Single‑channel/group fault does not affect safety function

3.4 Environmental (Enhanced for Harsh Conditions)

• Operating Temperature: –40 °C to +70 °C

• Storage Temperature: –40 °C to +85 °C

• Humidity: 5–95 % RH, non‑condensing (coating reduces condensation risk)

• Vibration: 10–57 Hz ±0.075 mm; 57–150 Hz 1.0 g

• Shock: 15 g, ½ sine wave, 11 ms

• Hazardous Area: ATEX / IECEx Ex ia IIC T4 Ga (with external safety barriers)

• Chemical Resistance: Resists salt mist, oil vapors, and common industrial gases

3.5 Safety & Certification

• Safety Standard: IEC 61508 SIL 3 (TÜV Certified)

• Approvals: CE, UL, CSA, ATEX, IECEx, FM

• Fault Tolerance: TMR 3‑2‑0; single‑fault safe

• PFHd: < 1.0 × 10⁻⁹ / hour (SIL 3)

4. Front Panel Indicators

• PWR (Green): ON = module power healthy

• RUN (Green): ON = active; FLASHING = BIST/initialization

• FAULT (Red): ON = critical fault; FLASHING = minor fault

• COM (Green): FLASHING = backplane communication active

• CH1–CH16 LEDs: Per‑channel status (ON = energized/active; FLASH = fault)

5. Installation

• Chassis: Insert into any vacant slot in T8100 / T8400 chassis

• Hot‑Swap: Supported (Companion Slot / SmartSlot)

• Front‑Panel Screws: Torque 0.8–1.0 Nm

• Termination: Connect to T8872 FTA (standard or Ex ia with barriers)

• Environmental Note: T8472C is mandatory for sites with > 85 % RH, corrosive vapors, salt mist, or temperature extremes

6. Wiring

• Output Channels: To 120 VAC solenoid valves, relays, contactor coils (1.0 A max)

• Field Power: 90–132 VAC / 50–60 Hz to T8872 FTA (per power group)

• Isolation: Field side isolated 2500 VAC from system/backplane

• Wire Gauge: 14–20 AWG, stranded, with suitable insulation for Ex areas

• Safety Note: For hazardous areas, use approved intrinsic safety barriers between module and field devices

7. Ordering Information

• T8472: Standard 16‑channel TMR digital output module (120 VAC, 0 °C to +60 °C)

• T8472C: Conformal coated 16‑channel TMR digital output module (–40 °C to +70 °C, harsh environments)

• T8872: Dedicated 120 VAC digital output FTA for T8472 / T8472C (standard or Ex ia)

• T8100 / T8400: Trusted system chassis