SCHNEIDER ELECTRIC TM5SBER2 ACCC0177236: Modicon TM5 Remote Receiver Module Product Description
Description
SCHNEIDER ELECTRIC TM5SBER2 ACCC0177236: Modicon TM5 Remote Receiver Module Product Description
Brand and Product Identification
The SCHNEIDER ELECTRIC TM5SBER2, with identification number ACCC0177236, is a remote receiver module from the Schneider Electric Modicon TM5 IP20 modular I/O system. The TM5 prefix identifies the Modicon TM5 platform, SBER identifies a bus receiver module for remote I/O communication and power distribution, and R2 identifies the specific receiver revision. The ACCC0177236 number is the unit or internal order reference associated with this module. The TM5SBER2 is compatible with Modicon M258 logic controllers and Modicon LMC058 motion controllers.
Product Function and System Role
The TM5SBER2 receives the TM5 data bus at a remote or distributed I/O island and distributes power to the TM5 bus and connected I/O modules. It pairs with a TM5SBET1 or related transmitter module to establish communication between a controller and a remote I/O station. The receiver module bridges the remote TM5 expansion bus cable with the local TM5 bus base, allowing digital and analog I/O modules to be located away from the controller cabinet. It is a bus communication and power distribution module, not a digital I/O module, analog module, power supply, controller or field sensor.
Bus and Cable Specifications
The TM5SBER2 supports a maximum bus length of 2500 m, or 8202.1 ft. Maximum cable distance between devices is 100 m. The module communicates over the TM5 expansion bus cable, such as the TCSXCNNXNX100 cable type referenced in the wiring diagram. The receiver current consumption is 25 mA at 24 V DC for input and output channels. Maximum power dissipation is 2.22 W. The module is installed at the remote I/O end of the transmitter and receiver bus link.
Local Signaling and Diagnostics
The TM5SBER2 provides local LED signaling for module and bus status. One green LED indicates power supply, one red LED indicates power bus current, one red LED indicates power supply, and one yellow LED indicates the communication data bus. LED states indicate normal operation, power absence, preoperational or reset state, power bus overload, low 24 V DC I/O power segment voltage, low TM5 power bus voltage, or invalid firmware according to the TM5 transmitter and receiver hardware guide. These indicators support commissioning, cable checking and remote I/O fault diagnosis.
Power Distribution and Wiring
The receiver module works with the 24 V DC I/O power segment integrated into the TM5 bus bases. External isolated 24 V DC SELV power supplies PS1 and PS2 are limited to 200 VA according to UL 508, or 150 VA according to CSA C22.2 No. 142. External fuse protection uses a T slow-blow fuse rated 10 A maximum at 250 V for one supply circuit and a 1 A, 250 V T slow-blow fuse for the other circuit, according to the module wiring diagram. The TM5 expansion bus cable connects the receiver to the remote transmitter, while field I/O modules connect to local TM5 bus bases in the remote island.
Mechanical and Environmental Ratings
The TM5SBER2 housing is grey, with dimensions of 12.5 mm width, 99 mm height and 75 mm depth, and a net weight of 0.025 kg. It mounts on a TM5 bus base or DIN rail arrangement in an IP20 control enclosure, with IP67 protection referenced for the related TM5 remote I/O environment where applicable. Operating temperature is 0 to 50 degrees Celsius vertically installed, 0 to 55 degrees Celsius without derating vertically installed, or 0 to 60 degrees Celsius with derating. Storage temperature ranges from minus 25 to plus 70 degrees Celsius. Relative humidity is 5 to 95 percent non-condensing, and pollution degree is 2 according to IEC 60664.
Standards and Approvals
The TM5SBER2 complies with CSA C22.2 No. 142, CSA C22.2 No. 213, IEC 61131-2 and UL 508. Product certifications include CSA, cULus, C-Tick and GOST-R. EMC and immunity specifications include electrostatic discharge, radiated electromagnetic field, electrical fast transient, surge immunity and conducted or radiated emission compliance described in the TM5 product datasheet. The module carries CE marking and is packaged as one unit per package, with bulk packaging available for production quantities.
Typical Application Scenarios
Typical applications include distributed TM5 I/O islands on packaging lines, material handling equipment, conveyors, assembly machines, machine tools and production machines where I/O stations are located away from the controller cabinet. The receiver module is used when remote I/O must communicate with a Modicon M258 PLC or LMC058 motion controller over a long TM5 bus. It supports scalable machine control architectures with local TM5 I/O modules grouped at remote equipment stations.
Installation and Configuration Notes
Installation should follow the Modicon TM5 transmitter and receiver hardware guide, TM5 system wiring recommendations and DIN rail mounting instructions. Mount the receiver on the remote TM5 bus base, connect the TM5 expansion bus cable to the transmitter end, verify external 24 V DC SELV supply and fuse ratings, and check LED status after power-up. Confirm controller compatibility, bus length, device spacing, power budget and module position before commissioning. If replacing a TM5SBER2, record the transmitter module, bus cable, remote I/O list and power supply arrangement to ensure the replacement matches the original system.
Advantages and Selection Notes
The TM5SBER2 provides remote TM5 data bus reception, TM5 bus power distribution, 2500 m maximum bus length, multi-LED diagnostics, low module current consumption, compact 12.5 mm width construction and compatibility with M258 and LMC058 controllers. When selecting a replacement, confirm receiver versus transmitter function, bus length, cable type, external power supply rating, fuse arrangement and controller compatibility. The TM5SBER2 is a remote bus receiver and power distribution module, not a complete PLC, I/O channel, power supply, relay or field actuator; its role is to receive and distribute the TM5 bus in a distributed Modicon TM5 automation system.
Get a Quote