Model T8017 is a professional intelligent testing device, widely used in laboratory, industrial production and quality inspection fields. It adopts high-precision sensor and intelligent control system, with stable performance, simple operation and reliable test data. It conforms to relevant international industry standard specifications. 2. Technical Parameters Power supply: AC 220V 50Hz Working temperature: -10℃ ~ 40℃ Relative humidity: ≤85% RH (non-condensing) Working pressure range: 0～200kPa Temperature control accuracy: ±0.1℃ Overall power: ≤1700W External dimension: 600×500×456mm 3. Main Features Full automatic operation, one-key start, automatic detection, data calculation and storage. High-precision temperature and pressure dual control system, stable and repeatable test results. Built-in over-pressure, over-temperature and low water level protection functions, safe and reliable. Humanized operation interface, support data query, export and printing. Water and electricity isolation design, long service life, easy daily maintenance. 4. Operation Steps Place the equipment on a horizontal stable platform, connect the power supply correctly. Add enough medium water into the water bath, check the liquid level to ensure it is within the standard range. Install the sample container and connect the pipeline correctly. Turn on the power, wait for the system self-check and constant temperature stabilization. Set sample information and test parameters on the operation panel. Press the start key, the equipment runs automatically until the test is completed. View, save or print the test result, then turn off the power and clean the equipment. 5. Safety Notes Do not operate the equipment beyond the specified temperature and pressure range. Do not disassemble the internal components privately, otherwise it will cause failure and safety hazard. Cut off the power supply before cleaning, maintenance and moving the equipment. Do not touch high-temperature parts during operation to avoid scalding. Keep the working environment ventilated, away from flammable and explosive materials. 6. Daily Maintenance Regularly check the water level, replace the bath water periodically to keep it clean. Clean the sample chamber, pipeline and sealing parts after each use. Regularly calibrate temperature and pressure parameters to ensure test accuracy. Keep the equipment surface dry and clean, avoid dust accumulation. If abnormal noise or data deviation occurs, stop operation immediately and check the fault.