NUVATION BMS NUV100-PI-D 11625000078

Overview

NUVATION BMS NUV100-PI-D 11625000078 is a battery management system controller manufactured by Nuvation Energy, part of the NUV100 series BMS platform. This PI-D variant is designed for large stationary energy storage systems and marine battery installations, supporting lithium-ion battery pack monitoring, cell balancing, protection and communication. It collects cell voltage, temperature and pack current data continuously, executes charge/discharge limit logic, and communicates with system master controllers, inverters and SCADA via standard industrial interfaces. The rugged design is suitable for cabinet-mounted energy storage and backup power applications, and it is widely stocked as an original spare for Nuvation energy storage retrofits and maintenance.

Features

NUVATION BMS NUV100-PI-D 11625000078 integrates high-precision analogue measurement circuits and embedded control logic. The BMS Controller provides passive or active cell balancing control, overvoltage, undervoltage, over-temperature, under-temperature and overcurrent protection. It supports configurable charge and discharge cut-off parameters, fault logging and event timestamp recording. It includes isolated communication ports for CANbus and Modbus, and supports firmware upgrade over communication link. Built-in diagnostic LEDs indicate power, run status and fault conditions. It complies with energy storage safety standards and marine environmental requirements. NUVATION BMS NUV100-PI-D 11625000078 works with Nuvation cell monitoring units to form a complete multi-string battery management system.

Specs

NUVATION BMS NUV100-PI-D 11625000078 BMS controller. The BMS Controller part number: NUV100-PI-D 11625000078. Series: NUV100 BMS. Function: battery pack master control, cell monitoring, protection, balancing. Communication: CANbus, Modbus. Mounting: DIN rail or panel mount. Enclosure: industrial plastic housing. Certification: energy storage safety certified. Lifecycle: active, available as original spare. It is stocked as energy storage battery management spare.

Operating Parameters

NUVATION BMS NUV100-PI-D 11625000078 ambient operating temperature: -20℃ ~ +60℃. The BMS Controller relative humidity: 5%~95% non-condensing. Protection class: IP20 for cabinet installation. EMC: comply with energy storage and marine control IEC standards.

Principle

NUVATION BMS NUV100-PI-D 11625000078 receives cell voltage and temperature data from cell monitoring boards. The BMS Controller compares measured values against configured safety thresholds, sends balancing commands to balance circuits, and outputs enable or inhibit signals to the inverter and contactor. It stores fault records and reports alarm messages to the upper control system. Measurement circuit drift, communication bus failure, or internal processor damage will cause NUVATION BMS NUV100-PI-D 11625000078 to lose battery protection and monitoring functions.

Applications

NUVATION BMS NUV100-PI-D 11625000078 is widely deployed in container energy storage systems, shore power battery banks, marine lithium battery backup systems and off-grid power stations. The BMS Controller manages lithium battery pack safety and energy flow, cooperating with cell monitor boards, contactors, inverters and supervisory systems. NUVATION BMS NUV100-PI-D 11625000078 is a preferred spare for Nuvation energy storage BMS maintenance and upgrade.