HT02-6AWS 09464_00022 Custom OEM Subassembly Product Description

Overview

HT02-6AWS is the model identifier, 09464_00022 is the OEM drawing / serial / configuration number. This is a non-standard catalog custom spare component; there is no public standard datasheet for this exact part number. It is most often a temperature & humidity transmitter assembly, analog signal conditioning board, probe head or signal interface subassembly used inside environmental cabinets, HVAC control, turbine monitoring, genset control racks or industrial process monitoring systems. It belongs to project-locked legacy spare, only for direct replacement of the identical unit on the original host equipment.

Features

This assembly integrates sensing element, filter circuit and signal conversion circuit defined by OEM drawing 09464_00022. It converts physical environmental variables or raw analog signals into standard 4–20mA / 0–10V / RS485 standardized signal for the main controller. HT02-6AWS 09464_00022 has built-in hardware self-diagnosis for open circuit, short circuit and overvoltage fault. Shielded signal wiring is required to suppress EMI interference in industrial cabinet environments. The signal range, output type, calibration parameter and mechanical connector definition are locked to this full part number.

Specs

• Base code: HT02-6AWS

• Full reference part number: 09464_00022

• Type: Custom OEM sensor / interface subassembly

• Power, measuring range, output definition: Follow OEM machine drawing

• Mounting: Duct mount / cabinet mount / probe type

• Status: Legacy project spare, no universal datasheet

• Replacement rule: Full part number and drawing revision must match exactly; different revision cannot be interchanged

Principle

HT02-6AWS 09464_00022 collects physical parameters through the sensing element. Onboard circuits perform filtering, temperature compensation and signal conversion, then send standardized measurement signals to the host controller. When sensor failure, cable break or electrical overload is detected, it outputs fault status to trigger alarm or interlock prompt.

Applications

Commonly used as spare parts on HVAC environmental control cabinets, clean room monitoring racks, turbomachinery auxiliary monitoring systems and diesel generator control cabinets. HT02-6AWS 09464_00022 can only replace the matching unit on the original equipment.

Installation & Maintenance Notes

Follow OEM service drawing 09464_00022 for replacement. Apply ESD protection before handling the board or sensing probe. Record all wiring mapping before disassembly. After replacement, complete signal calibration test and communication verification. Back up controller configuration and alarm threshold parameters before swap. Confirm the full part number HT02-6AWS 09464_00022 matches perfectly.