Woodward easYgen‑3200XT‑P1 8440‑2082 Genset Controller Product Description

Overview

Woodward easYgen‑3200XT‑P1 8440‑2082 is a front‑panel mounted genset paralleling and power management controller from the Woodward easYgen‑3000XT series. This Woodward generator controller supports single‑unit AMF automatic mains failure operation and peer‑to‑peer parallel operation for up to 32 generators, islanded or grid‑tied. easYgen‑3200XT‑P1 8440‑2082 integrates LCD display, keypad, measurement acquisition, protection logic and bus tie control, widely used for power plant, data centre and backup power cabinet commissioning, system upgrade and spare‑part replacement of redundant generator control systemsWoodward S....

Features

Woodward easYgen‑3200XT‑P1 8440‑2082 supports true RMS measurement of generator and mains three‑phase voltage, current, power, frequency and energy. This Woodward genset controller includes built‑in LogicsManager™ and AnalogManager™ programmable logic, which can realize custom interlock and analog calculation without an extra PLC. easYgen‑3200XT‑P1 8440‑2082 provides comprehensive generator protection: over/under voltage, over/under frequency, reverse power, overcurrent, loss of excitation, phase sequence and earth fault. The controller supports Modbus, CAN and peer communication for multi‑set load sharing and SCADA connection. It supports flexible breaker control sequences for mains‑generator transfer and bus coupler interlock, with configurable time settings and dead bus closure logic.

Specs

Woodward easYgen‑3200XT‑P1 8440‑2082 genset controller

• Brand: Woodward

• Series: easYgen‑3000XT

• Model: easYgen‑3200XT‑P1

• Part number: 8440‑2082

• Mounting: Front panel mount with display and keypad

• Function: AMF, single genset, multi‑genset paralleling (max 32 units)

• Measurement: 3‑phase generator, 3‑phase mains RMS

• Load control: Isolated / grid parallel, load sharing

• Logic: LogicsManager™, AnalogManager™

• Communication: Peer‑to‑peer, Modbus, CAN

• Operating voltage: 9–36 VDC auxiliary supply

• Protection suite: Overvoltage, undervoltage, overfrequency, underfrequency, reverse power, overcurrent

• Software: easYgen‑XT configuration tool

Principle

Woodward easYgen‑3200XT‑P1 8440‑2082 continuously samples voltage and current signals from PT and CT. In AMF mode, when mains power deviates from threshold, the controller sends engine start command, synchronizes and closes the generator breaker. For parallel systems, controllers exchange data via peer bus to distribute active and reactive load evenly among running gensets. Internal logic compares measured values with protection thresholds; when faults are detected, it triggers alarm or generator trip. All parameters, schedules and fault records can be read and modified via configuration software or local keypad.

Applications

Woodward easYgen‑3200XT‑P1 8440‑2082 is deployed in data centre backup power rooms, hospital critical power, oil & gas auxiliary power plants and industrial multi‑generator stations. This Woodward controller serves as the core master unit for redundant diesel generator systems. easYgen‑3200XT‑P1 8440‑2082 fits generator control cabinet overhaul, parallel system modification and spare replacement of legacy easYgen‑XT controllers.

Installation & Maintenance Notes

Follow official Woodward easYgen‑3000XT service manuals during installation of easYgen‑3200XT‑P1 8440‑2082. Confirm CT polarity, PT wiring and breaker interlock after replacement to avoid cross‑source paralleling risk. Back up application configuration, load sharing and protection parameters before replacement. Perform dry run, mains loss simulation and synchronizing test after commissioning. Check 24V auxiliary power, communication cable shielding and terminal tightness regularly. Confirm exact part number 8440‑2082 before spare‑part swap‑out to verify front display version and firmware compatibility.