1. Basic Product Information

• Part Number: 5X00230G01 (alternative part number: 1P00049G01)

• Manufacturer: Emerson Automation Solutions (Former Westinghouse)

• Module Type: Isolated Digital Output (DO) Module

• Compatible System: Ovation DCS Distributed Control System

• Mounting Mode: Single-slot plug-in installation on standard Ovation 4/8-slot I/O backplane

• Maintenance Feature: Hot swappable; online replacement following standard operation procedures without rack power shutdown

• Origin: United States

• Net Weight: 1.42 kg

• Protection Grade: IP20, exclusive installation inside indoor control cabinets

• Structure: Standard FRU field replaceable unit

2. Core Technical Specifications & Functional Features

2.1 Output Drive Characteristics

• Supports DC active voltage output or passive relay contact output modes, directly driving external low-power coils and signal indication loads

• Each output channel is independently galvanically isolated from the internal backplane logic bus; short-circuit or overload fault on one channel will not crash other channels or rack communication bus

• Configurable fault safe state: when communication loss or module hardware failure occurs, each channel can be preset to ON, OFF or hold original state

• Matches dedicated personality module for hardware-level output mode definition, no onboard jumper modification required

2.2 Protection & Filter Design

• Every channel integrates overcurrent, short-circuit, reverse polarity and surge suppression protection circuits, avoiding module burnout caused by field wiring errors or load short-circuit

• Built-in output hardware delay filter, eliminates frequent rapid switching bounce caused by external load interference and prevents misoperation of field equipment

• Isolation withstand voltage: 1000V AC/DC between channel and logic side, meeting industrial anti-interference safety standards

2. Electrical Specifications

• Logic power supplied directly by I/O rack backplane 24VDC, no additional external power wiring needed

• Low power consumption, imposes no extra load on rack backplane power bus

• Front panel independent LED indicators display module power supply, backplane communication status and each channel output on/off & fault state for rapid on-site inspection

2.3 Diagnosis & Environmental Indicators

• Real-time full self-diagnosis automatically detects output overload, load short-circuit, loop disconnection and communication anomalies

• Fault codes and abnormal channel numbers are uploaded to upper controller via backplane bus for remote centralized fault positioning

• Operating temperature range: 0℃ ~ +60℃

• Storage temperature range: -40℃ ~ +85℃

• Relative humidity: 5%–95% RH, non-condensing

• Complies with IEC 61000 series industrial EMC electromagnetic compatibility standards, shock and vibration resistant

• Certified with CE, UL international industrial safety certifications

2.4 Operation & Compatibility Advantages

• Modular FRU design, same-type modules fully interchangeable, convenient spare parts inventory management for power plants and chemical enterprises

• Fully compatible with Ovation 5X00225G01 (4-slot) and 5X00226 series (8-slot) backplanes, applicable to new cabinet assembly, system expansion and old system renovation projects

• Supports redundant control architecture deployment, ensuring uninterrupted sequence logic execution for critical equipment

3. Application Fields