1. Basic Product Information

• Part Number: 5X00167G01

• Manufacturer: Emerson Automation Solutions (Former Westinghouse)

• Module Type: 8-channel isolated HART high-performance analog output module

• Compatible System: Ovation DCS Distributed Control System

• Mounting Mode: Plug-in installation on standard Ovation I/O backplane rack

• Maintenance Feature: Hot swappable, module replacement without rack power-off or system shutdown

• Origin: Thailand

• Net Weight: 0.69 lbs

• Protection Grade: IP20, indoor control cabinet installation only

• Structure: Standard FRU field replaceable unit

2. Core Technical Specifications & Features

2.1 Analog Output & HART Function

• Channel quantity: 8 independent isolated output channels

• Standard output signal: 4–20mA DC sourcing current signal, supports superimposed HART digital signal multiplex transmission

• D/A conversion: High-resolution DAC, output full-scale accuracy ≤±0.1% FS

• HART compliance: Supports HART 5/7 protocol; can remotely configure valve positioner parameters, read actuator feedback status, perform online calibration and fault diagnosis on the same signal cable, compatible with AMS asset management system

• Each channel supports configurable fail-safe output value (hold last value / preset low/high value) upon module communication loss or fault

2. Isolation & Protection Design

• Channel-to-backplane galvanic isolation, single-channel short-circuit, overload or wiring error will not affect other channels and system internal bus

• Each channel integrates overcurrent, short-circuit, reverse polarity and surge protection circuits to avoid module burnout caused by field wiring mistakes

• Built-in hardware filtering circuit, effectively suppresses power frequency and electromagnetic interference from field equipment

2. Electrical Parameters

• Module logic power supplied by Ovation I/O backplane; field 24VDC loop power independently supplied to 4–20mA actuator loops

• Low power consumption, no extra load on rack backplane bus

• Onboard LED indicators separately display module power status, backplane communication status and each channel running/fault state for quick on-site inspection

• Equipped with personality module slot for hardware-level signal range and output mode configuration, no main board jumper modification required

2. Environmental & Certification Indexes

• Operating temperature range: 0℃ ~ +60℃

• Storage temperature range: -40℃ ~ +85℃

• Relative humidity: 5%–95% RH, non-condensing

• Complies with IEC 61000 series industrial EMC anti-interference standards, shock-resistant and vibration-resistant

• Certified with CE, UL international industrial safety certifications

2. Diagnosis & Maintenance Advantages

• Real-time full self-diagnosis detects loop open circuit, output over-range, HART communication interruption and module hardware faults

• Fault codes and abnormal channel information uploaded to upper controller via backplane bus for remote rapid troubleshooting

• Plug-and-play hot-swap design drastically shortens maintenance downtime and improves system continuous operation rate

• Same-type modules are universally interchangeable, easy spare parts inventory management for power plants and chemical enterprises

3. Application Fields