1. Basic Information

• Part Number: 5X00106G01

• Manufacturer: Emerson (Westinghouse)

• Module Type: HART-enabled High-Speed Analog Input (AI) Module

• Compatible System: Ovation DCS Distributed Control System

• Number of Channels: 8 independent isolated input channels

• Mounting Mode: Standard Ovation I/O backplane rack plug-in installation

• Maintenance Feature: Hot swappable, module replacement without system shutdown

• Protection Grade: IP20, for indoor control cabinet installation only

• Origin: United States

2. Complete Technical Specifications

2.1 Signal Input Parameters

• Supported input signals: 4–20mA DC current signal, 0–10V DC voltage signal

• Isolation specification: Individual channel-to-backplane galvanic isolation (500 V RMS), single-channel failure will not affect other channels

• ADC resolution: 16-bit high precision

• Measurement accuracy: ≤ ±0.1% full scale

• Channel update rate: 10 ms per single channel, high-speed sampling suitable for fast changing process variables

• CMRR: ≥100 dB at 50/60 Hz, excellent suppression of common-mode interference

• Input impedance: >1 MΩ for voltage signals, matched 250 Ω sampling resistance for current signals

• HART function: Built-in HART transceiver, supports HART 5/7 protocol, realizes remote parameter configuration, equipment status reading and fault diagnosis of intelligent transmitters on the same signal wire pair

2. Electrical Specifications

• Power supply: Powered by DCS backplane 5 V DC, no external auxiliary power supply required

• Low power consumption, imposes no extra load on the system backplane bus

• Each channel is equipped with open-circuit, overload and overvoltage protection circuits to avoid module damage caused by field wiring faults

2. Environmental & Certification Indicators

• Operating temperature range: 0 ℃ ~ +60 ℃

• Storage temperature range: -40 ℃ ~ +85 ℃

• Relative humidity: 5%–95% RH, non-condensing

• Complies with IEC EMC electromagnetic compatibility standards, shock-proof, vibration-resistant and dust-proof

• Certified with CE, UL and CSA international industrial safety certifications

2. Diagnosis & Maintenance Functions

• Real-time automatic self-inspection detects channel open circuit, signal over-range, short circuit and power supply anomalies

• Fault alarm information is uploaded to the upper DCS controller via backplane bus instantly for rapid fault location

• Plug-and-play hot-swap design drastically shortens on-site maintenance downtime and improves system continuous operation rate

• Supports configurable fault safety values for each channel to ensure stable control output during signal loss

3. Application Fields