5X00105G07 HART-Compatible Isolated Analog Output Module for Emerson Ovation DCS Product Brief Introduction_Ningde Androld Automation Equipment Co.,Ltd.

June 12, 2026

5X00105G07 HART-Compatible Isolated Analog Output Module for Emerson Ovation DCS Product Brief Introduction

The 5X00105G07 is an upgraded high-precision analog output module developed exclusively for the Emerson Ovation distributed control system. It converts digital control commands sent by the main controller into standard 4–20mA DC analog signals to drive field regulating valves, intelligent valve positioners and other actuators, while supporting superimposed HART bidirectional communication for remote parameter configuration and equipment status feedback of smart field instruments. Equipped with independent channel galvanic isolation, full-range fault self-diagnosis and hot-swap structure, the module delivers superior anti-electromagnetic interference performance and long-term stable output accuracy, fully satisfying high-reliability closed-loop regulation requirements of core industrial process control loops。

Description

1. Basic Product Information

Part Number: 5X00105G07
Manufacturer: Emerson (Westinghouse)
Module Type: HART-enabled Isolated Analog Output (AO) Module
Compatible System: Ovation DCS Distributed Control System
Mounting Mode: Standard Ovation I/O backplane rack installation
Maintenance Feature: Hot swappable, module replacement without shutting down the whole control system
Protection Grade: IP20, for indoor control cabinet installation only

2. Complete Technical Specifications

2.1 Signal Output Performance

Standard output signal: 4–20mA DC current signal
Multiple isolated independent output channels, galvanic isolation between field side and control logic side eliminates signal crosstalk and on-site electromagnetic interference
High-resolution D/A conversion technology, full-scale output accuracy ≤ ±0.1% FS
Native HART protocol integration, realizing two-way data exchange, remote calibration and fault diagnosis of HART intelligent instruments
Each channel integrates short-circuit, overload and reverse connection protection circuits to prevent module damage caused by field wiring faults

2. Electrical Parameters

Power supply mode: Powered by system backplane 24VDC, no external auxiliary power supply needed
Low power consumption, brings no extra load burden to the DCS backplane bus
Strong channel load driving capability, adaptable to long-distance field cable wiring scenarios

2. Environmental & Certification Index

Operating temperature: 0℃ ~ +60℃
Storage temperature: -40℃ ~ +85℃
Relative humidity: 5%–95% RH, non-condensing
Complies with IEC industrial EMC anti-interference standards, shock-proof, dust-proof and moisture-proof
Obtained CE, UL, CSA international industrial safety certifications

2. Diagnosis & Maintenance Functions

Real-time automatic self-check detects channel open circuit, overload, short circuit and power supply abnormalities
Fault alarm information is uploaded to the upper DCS controller via backplane bus instantly for rapid fault location
Plug-and-play hot-swap design significantly shortens on-site maintenance downtime and improves system continuous operation rate

3. Application Fields

This module is perfectly matched with the Ovation DCS control platform and widely deployed in thermal power plants, petrochemical engineering, metallurgy, natural gas transmission, municipal water treatment, pulp and paper and other continuous process industries. It executes automatic control instructions issued by the DCS system, outputs standard analog signals to adjust regulating valves, baffles and actuators, and achieves precise closed-loop regulation of flow rate, pressure, liquid level, temperature and other key process parameters. Supported by HART two-way communication function, it realizes intelligent management of field devices, ensures stable and accurate process adjustment, and serves as core output hardware to guarantee safe, continuous and high-efficiency operation of large-scale industrial automation control systems。

5X00105G14

搜索 2 个关键词，参考 12 篇资料

Title

5X00105G14 HART-Enabled Isolated Analog Output Module for Emerson Ovation DCS

Product Brief Introduction

The 5X00105G14 is an original Emerson Ovation dedicated analog output module with built-in HART communication function. It converts digital control commands from the DCS main controller into standard 4–20mA DC analog signals to drive field regulating valves, intelligent valve positioners and other actuators, while supporting bidirectional HART data interaction with smart field instruments for remote parameter configuration and equipment status feedback. Adopting independent channel galvanic isolation design, full fault self-diagnosis and hot-swap structure, the module delivers outstanding anti-electromagnetic interference performance and long-term stable output precision, meeting high-reliability closed-loop regulation demands of core industrial process control loops。

Detailed Product Content

1. Basic Product Information

Part Number: 5X00105G14
Manufacturer: Emerson (Westinghouse)
Module Type: HART-Compatible Isolated Analog Output (AO) Module
Compatible System: Ovation Distributed Control System (DCS)
Mounting Mode: Standard Ovation I/O backplane rack plug-in installation
Maintenance Characteristic: Hot swappable, module replacement without system shutdown
Overall Dimensions: 150mm × 100mm × 30mm
Net Weight: 0.68 kg
Protection Grade: IP20, only for indoor control cabinet installation

2. Complete Technical Specifications

2.1 Signal Output Performance

Standard output range: 4–20mA DC current signal
Multiple independent isolated output channels, galvanic isolation between field side and control logic side effectively blocks signal crosstalk and on-site strong electromagnetic interference
High-precision D/A conversion technology, full-scale output accuracy ≤ ±0.1% FS
Native integrated HART protocol, realizing remote calibration, parameter modification, fault diagnosis and real-time status upload of HART intelligent field devices
Each channel is equipped with short-circuit, overload and reverse connection protection circuits to avoid permanent module damage caused by field wiring faults

2. Electrical Parameters

Power supply mode: Powered by system backplane 24VDC, no external auxiliary power supply required
Low power consumption, will not bring additional load pressure to the DCS backplane bus
High channel load driving capability, compatible with long-distance field cable wiring engineering scenarios

2. Environmental & Certification Indicators

Operating temperature range: 0℃ ~ +60℃
Storage temperature range: -40℃ ~ +85℃
Relative humidity: 5%–95% RH, non-condensing
Fully complies with IEC industrial EMC electromagnetic compatibility standards, shock-proof, dust-proof and moisture-proof
Obtained CE, UL, CSA international industrial safety certifications

2. Diagnosis & Maintenance Functions

Real-time automatic self-inspection continuously monitors channel open circuit, overload, short circuit and power supply anomalies
Fault alarm information is uploaded to the upper DCS controller via backplane bus in real time for rapid fault positioning and troubleshooting
Plug-and-play hot-swap design greatly shortens on-site equipment maintenance downtime and improves the overall continuous operation rate of the control system

3. Application Fields

This module is perfectly matched with the Ovation DCS control platform and widely deployed in thermal power plants, petrochemical engineering, natural gas transmission, metallurgy, municipal water treatment, pulp and paper and other continuous process industries. It executes automatic control instructions issued by the DCS system, outputs standard analog signals to adjust regulating valves, baffles and field actuators, and realizes precise closed-loop automatic regulation of flow rate, pressure, liquid level, temperature and other key process parameters. Supported by HART two-way communication capability, it realizes centralized intelligent management of on-site instruments, ensures stable and accurate process adjustment, and serves as core output hardware to guarantee safe, continuous and high-efficiency operation of large-scale industrial automation control systems。

Contact Info