1. Product Title

2. Product Introduction

3. Technical Parameters

1. Part Number：5A26458G01

2. Machining Technology：CNC precision turning, fine surface polishing, anti-corrosion coating treatment

3. Raw Material：High-strength wear-resistant alloy

4. Installation Mode：Direct in-place mounting, no modification required

5. Operating Temperature Range：-20℃ ~ 120℃

6. Protection Performance：Industrial dust-proof & oil-proof

7. Assembly Tolerance：±0.01 mm

8. Rated Service Life：≥20000 working hours under normal operating conditions

9. Packaging：Single-piece independent sealed package; bulk shipments adopt moisture-proof export cartons

4. Installation & Operation Manual

4.1 Pre-installation Inspection

1. Confirm the part number is exactly 5A26458G01, check outer packaging integrity; inspect workpiece surface for bumps and scratches, verify threads and positioning interfaces have no deformation.

2. Clear oil stains, iron filings and impurities on the equipment mounting base to form a flat and clean assembly contact surface.

4.2 Installation Steps

1. Dismount the aged and damaged old component of the identical model, thoroughly remove residual gaskets and debris inside the mounting seat.

2. Align 5A26458G01 with positioning bayonets and insert smoothly, then implement temporary manual pre-fixation.

3. Tighten fasteners step by step according to OEM specified torque values. One-time forced tightening is forbidden to avoid stress deformation of the component.

4. Manually rotate the matched transmission assembly after installation, check for jamming, displacement or abnormal operating noise.

4.3 Trial Operation & Routine Maintenance

1. Perform a 10–15 minute no-load trial run; full-load operation can only be started after confirming no leakage, overheating, vibration or other abnormalities are detected.

2. Inspect and re-tighten connecting fasteners every 3000 cumulative working hours, replenish lubricating grease timely.

3. Long-term overload operation or operation exceeding the rated temperature range is strictly prohibited.

4.4 Important Precautions

1. This component is only compatible with designated matched equipment; forced cross-model refitting is not allowed.

2. Installation and disassembly operations must be completed by certified professional maintenance technicians.

3. Store the product in a dry and ventilated warehouse, keep isolated from acids, alkalis and corrosive substances, avoid direct sunlight and humid storage environments.

5. Application Fields

1. Complete machine assembly and vulnerable wear parts replacement for automated production lines

2. Maintenance and overhaul of construction machinery and heavy-duty industrial equipment

3. Consumable wear component replacement for CNC machine tools and injection molding equipment

4. Matching assembly fittings for new energy and lithium battery production lines

5. Auxiliary supporting components for transmission mechanisms in metallurgy, mining and chemical industries