1. Product Title

2. Product Introduction

3. Specifications

1. Model No.: 5A26430H11

2. Processing Technology: CNC precision turning, fine polishing, anti-corrosion coating treatment

3. Main Material: High-strength wear-resistant alloy

4. Installation Mode: Direct in-place mounting, no modification required

5. Operating Temperature Range: -20℃ ~ 120℃

6. Protection Grade: Industrial dust-proof and oil-proof

7. Assembly Tolerance: ±0.01 mm

8. Rated Service Life: ≥20000 working hours under normal operating conditions

9. Packaging: Individual sealed package for single piece; moisture-proof export carton for bulk shipments

4. User Manual

4.1 Pre-installation Inspection

1. Confirm the component model is 5A26430H11. Check the outer package is intact and undamaged; confirm no bumps or scratches on the workpiece, and threads and positioning interfaces remain undeformed.

2. Remove oil stains, iron filings and impurities on the equipment mounting base to form a flat and clean assembly contact surface.

4.2 Installation Steps

1. Dismount the aged and damaged old component of the same model, and thoroughly clean residual gaskets and debris inside the mounting seat.

2. Align Model 5A26430H11 with positioning bayonets and insert smoothly, then fix temporarily via manual pre-positioning.

3. Tighten fasteners step by step according to the torque value specified by OEM. One-time forced tightening is forbidden to prevent stress deformation of the component.

4. Manually rotate the transmission assembly after installation and check for jamming, displacement or abnormal noise.

4.3 Trial Operation & Routine Maintenance

1. Carry out a 10–15 minute no-load trial run. Full-load operation can only be started if no leakage, overheating, vibration or other abnormal conditions are detected.

2. Inspect and retighten connecting parts every 3000 cumulative working hours, and replenish lubricating grease in a timely manner.

3. Long-term overload operation or operation exceeding the rated temperature range is strictly prohibited.

4.4 Precautions

1. This component is only compatible with designated matched equipment; forced cross-model refitting is not allowed.

2. Installation operations must be completed by certified professional maintenance technicians.

3. Store the product in a dry and ventilated warehouse, keep away from acid, alkali and corrosive substances, and avoid direct sunlight and dampness.

5. Application Fields

1. Complete machine assembly and vulnerable spare parts replacement for automated production lines

2. Maintenance and overhaul of construction machinery and heavy-duty industrial equipment

3. Wearing component replacement for CNC machine tools and injection molding equipment

4. Matching assembly parts for new energy and lithium battery production lines

5. Auxiliary supporting fittings for transmission mechanisms in metallurgy, mining and chemical industries