1. Product Title

2. Product Introduction

3. Specifications

1. Model Number: 5A26355H13

2. Processing Technology: CNC precision turning, fine polishing, anti-corrosion coating treatment

3. Main Material: High-strength wear-resistant alloy

4. Installation Mode: Direct in-place mounting, no modification needed

5. Operating Temperature Range: -20℃ ~ 120℃

6. Protection Standard: Industrial dust-proof and oil-proof

7. Assembly Tolerance: ±0.01 mm

8. Rated Service Life: ≥20000 working hours under normal working conditions

9. Packaging: Individual independent package for single piece; moisture-proof carton packaging for bulk shipments

4. User Manual

4.1 Pre-installation Inspection

1. Confirm the part model is 5A26355H13. Check the outer package is intact without damage; ensure the component has no bumps or scratches, and threads and assembly interfaces are free of deformation.

2. Clean oil stains, iron filings and impurities on the equipment mounting base to ensure a flat and clean contact surface for assembly.

4.2 Installation Steps

1. Remove the aged and damaged old part of the identical model, and clear residual gaskets and debris inside the mounting seat.

2. Align 5A26355H13 with positioning bayonets and insert steadily, then complete preliminary manual positioning and fixation.

3. Tighten fasteners step by step following the torque requirements specified by the original equipment manufacturer. One-time violent tightening is forbidden to prevent stress deformation of the part.

4. Manually rotate the transmission components after installation, and check for jamming, offset or abnormal noises.

4.3 Trial Operation & Daily Maintenance

1. Perform a 10–15 minute no-load trial run. Do not switch to full-load operation until no leakage, overheating, shaking or other abnormal phenomena are found.

2. Inspect and retighten connecting fittings every 3000 working hours, and replenish lubricating grease in a timely manner.

3. Long-term overload operation or operation exceeding the temperature limit is prohibited.

4.4 Precautions

1. This component is only compatible with designated matched equipment; forced cross-model refitting is not allowed.

2. Installation operations must be carried out by certified professional maintenance technicians.

3. Store the product in a dry and ventilated environment, keep away from acid, alkali and corrosive substances, and avoid direct sunlight and dampness.

5. Application Fields

1. Complete machine assembly and spare parts replacement for automated production lines

2. Maintenance and servicing of construction machinery and heavy-duty equipment

3. Wearing part replacement for CNC machine tools and injection molding equipment

4. Matching assembly components for new energy and lithium battery production lines

5. Auxiliary fittings for transmission mechanisms in metallurgy, mining, chemical and other general industrial sectors