1. Product Title

2. Product Introduction

3. Specifications

1. Model No.: 5A26355H11

2. Processing Technology: CNC precision turning, fine polishing, anti-corrosion coating treatment

3. Main Material: High-strength wear-resistant alloy

4. Installation Mode: Direct on-site mounting, no modification needed

5. Operating Temperature: -20℃ ~ 120℃

6. Protection Performance: Industrial dust-proof and oil-proof

7. Assembly Tolerance: ±0.01mm

8. Design Service Life: ≥20000 hours under normal working conditions

9. Packaging: Individual separate package for single piece; moisture-proof carton packaging for bulk goods

4. User Manual

4.1 Pre-installation Check

1. Verify the part model is 5A26355H11; check that the outer package is intact, the component has no collision scratches, and threaded holes and connecting interfaces remain undeformed.

2. Clear oil stains, metal scraps and impurities on the equipment mounting base to guarantee a smooth and clean mating surface.

4.2 Installation Procedures

1. Dismount the aged and damaged original part of the same model, and remove leftover gaskets and debris from the installation position.

2. Align Model 5A26355H11 with positioning clips and insert it smoothly, then perform preliminary manual positioning and fixing.

3. Tighten fasteners step by step according to the torque value specified by the original equipment manufacturer. Avoid one-step forced tightening to prevent stress deformation of the part.

4. Manually rotate the transmission components after assembly, and confirm there is no jamming, offset or abnormal noise.

4.3 Trial Operation & Routine Maintenance

1. Carry out no-load trial operation for 10–15 minutes; start full-load operation only if no leakage, overheating, shaking or other abnormalities are detected.

2. Inspect and re-tighten connecting fittings every 3000 operating hours, and replenish lubricating grease in a timely manner.

3. Long-term operation under overload or extreme temperature conditions is prohibited.

4.4 Important Notes

1. This part only matches designated specific equipment; forced cross-model refitting is forbidden.

2. Installation work shall only be completed by certified professional maintenance technicians.

3. Store the product in a dry and ventilated environment, keep away from acid, alkali and corrosive substances, and protect from moisture and direct sunlight.

5. Application Fields

1. Assembly and spare parts replacement of automated production lines

2. Maintenance and servicing of construction machinery and heavy-duty equipment

3. Replacement of vulnerable parts for CNC machine tools and injection molding machines

4. Matching assembly components for new energy and lithium battery production lines

5. Supporting structural parts for transmission mechanisms in metallurgy, mining, chemical and other general industrial sectors