Specifications & Technical Parameters

1. Model Number: 5A26355H02

2. Operating Temperature: -10℃ ~ +55℃

3. Storage Temperature: -20℃ ~ +60℃

4. Relative Humidity: 5%–90% RH, non-condensing

5. Mounting Mode: Snap positioning + screw fastening

6. Protection Functions: Anti-surge, anti-electromagnetic interference

7. Designed Service Life: ≥50000 working hours

8. Connection Mode: Standard pluggable terminal connection

Product Manual

1. Pre-installation Inspection

2. Installation Requirements

1. Fix the module strictly following equipment assembly drawings, tighten fasteners with specified torque value; over-tightening is forbidden to avoid casing deformation.

2. Clearly separate power terminals and signal terminals during wiring, fasten connectors tightly to prevent poor contact, open circuit or sudden signal loss.

3. Do not install the module in areas with corrosive liquid, heavy dust accumulation, sustained high temperature or intensive electromagnetic radiation sources.

3. Operation Specifications

1. Double-check all wiring connections before the first power-on, conduct a 3–5 minute no-load trial run. Switch to full-load operation only if no abnormal noise and excessive temperature rise are detected.

2. Operate strictly within rated technical indexes; long-term overload or overvoltage operation is strictly prohibited.

3. Regularly check module temperature and connector fastening status during operation. Cut off main power supply and shut down equipment for troubleshooting immediately once abnormalities occur.

4. Maintenance Instructions

1. Cut off total power supply and clean dust and grease on terminals every 3 months for regular maintenance.

2. Check tightness of fixing fasteners annually, replace aging cables and damaged plugs timely.

3. Unauthorized disassembly of internal precision components is prohibited; maintenance conducted by non-professional personnel will void the product warranty.

5. Storage Conditions

6. Simple Troubleshooting

1. Host equipment no response: Check power lines and connectors for disconnection or falling off.

2. Signal jitter & intermittent operation: Eliminate external electromagnetic interference and retighten loose wiring terminals.

3. Abnormal overheating: Confirm overload operation; power off for full cooling and recheck actual load parameters.

7. Safety Warnings

1. Cable plugging/unplugging and module disassembly are prohibited under live state.

2. Completely disconnect main power supply and wait for full capacitor discharge before any maintenance work.

3. Scrapped modules shall be recycled as industrial electronic waste complying with local environmental regulations; arbitrary discarding is forbidden.

Application Fields

1. Automatic assembly production lines

2. CNC machinery and electromechanical control devices

3. Precision inspection instruments and testing equipment

4. Intelligent warehousing and logistics conveying systems

5. Complete industrial automation control systems

6. Auxiliary automation equipment for packaging, metallurgy and machining industries